Hi, I don't recommend to set weight to zero, because you may see MAX_AVAIL=0 in `ceph df` due to #13840. http://tracker.ceph.com/issues/13840 Any small & non-zero value is fine. Tom On 01-12 09:01, Rafael Lopez wrote: > I removed some osds from a host yesterday using the reweight method and it > worked well. There was only one rebalance and then I could perform the rest > of the documented removal steps immediately with no further recovery. I > reweighted to 0.0. > > Shinobu, can you explain why you have found 0.2 is better than 0.0? What > happens when you use 0.2 and what happens when you use 0.0 ? > > Rafael > > > > On 12 January 2016 at 09:13, Shinobu Kinjo <skinjo@xxxxxxxxxx> wrote: > > > Based on my research, 0.2 is better than 0.0. > > Probably it depends though. > > > > > ceph osd crush reweight osd.X 0.0 > > > > Rgds, > > Shinobu > > > > ----- Original Message ----- > > From: "Andy Allan" <gravitystorm@xxxxxxxxx> > > To: "Rafael Lopez" <rafael.lopez@xxxxxxxxxx> > > Cc: ceph-users@xxxxxxxxxxxxxx > > Sent: Monday, January 11, 2016 8:08:38 PM > > Subject: Re: double rebalance when removing osd > > > > On 11 January 2016 at 02:10, Rafael Lopez <rafael.lopez@xxxxxxxxxx> wrote: > > > > > @Steve, even when you remove due to failing, have you noticed that the > > cluster rebalances twice using the documented steps? You may not if you > > don't wait for the initial recovery after 'ceph osd out'. If you do 'ceph > > osd out' and immediately 'ceph osd crush remove', RH support has told me > > that this effectively 'cancels' the original move triggered from 'ceph osd > > out' and starts permanently remapping... which still doesn't really explain > > why we have to do the ceph osd out in the first place.. > > > > This topic was last discussed in December - the documentation for > > removing an OSD from the cluster is not helpful. Unfortunately it > > doesn't look like anyone is going to fix the documentation. > > > > http://comments.gmane.org/gmane.comp.file-systems.ceph.user/25627 > > > > Basically, when you want to remove an OSD, there's an alternative > > sequence of commands that avoids the double-rebalance. > > > > The better approach is to reweight the OSD to zero first, then wait > > for the (one and only) rebalance, then mark out and remove. Here's > > more details from the previous thread: > > > > http://permalink.gmane.org/gmane.comp.file-systems.ceph.user/25629 > > > > Thanks, > > Andy > > _______________________________________________ > > ceph-users mailing list > > ceph-users@xxxxxxxxxxxxxx > > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com > > > > > > -- > Senior Storage Engineer - Automation and Delivery > Infrastructure Services - eSolutions > 738 Blackburn Rd, Clayton > Monash University 3800 > Telephone: +61 3 9905 9118 <%2B61%203%209905%9118> > Mobile: +61 4 27 682 670 > Email rafael.lopez@xxxxxxxxxx > _______________________________________________ > ceph-users mailing list > ceph-users@xxxxxxxxxxxxxx > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
Attachment:
signature.asc
Description: Digital signature
_______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
