----- Original Message ----- > From: "Brad Hubbard" <bhubbard@xxxxxxxxxx> > To: "Aakanksha Pudipeddi-SSI" <aakanksha.pu@xxxxxxxxxxxxxxx> > Cc: ceph-users@xxxxxxxx > Sent: Friday, 28 August, 2015 10:54:04 AM > Subject: Re: Rados: Undefined symbol error > > ----- Original Message ----- > > From: "Aakanksha Pudipeddi-SSI" <aakanksha.pu@xxxxxxxxxxxxxxx> > > To: "Brad Hubbard" <bhubbard@xxxxxxxxxx> > > Cc: "Jason Dillaman" <dillaman@xxxxxxxxxx>, ceph-users@xxxxxxxx > > Sent: Friday, 28 August, 2015 6:15:12 AM > > Subject: RE: Rados: Undefined symbol error > > > > Hello Brad, > > > > Thank you for your response. Looks like the command is undefined. > > > > U _ZN5Mutex4LockEb > > U _ZN5Mutex6UnlockEv > > U _ZN5MutexC1ERKSsbbbP11CephContext > > U _ZN5MutexD1Ev > > $ git checkout v9.0.2 > M src/civetweb > HEAD is now at be422c8... 9.0.2 > > $ git show|head -1 > commit be422c8f5b494c77ebcf0f7b95e5d728ecacb7f0 > > $./autogen.sh && ./configure && make -j2 > $ sudo make install > > $ which rados > /usr/local/bin/rados > $ rados -v > ceph version 9.0.2 (be422c8f5b494c77ebcf0f7b95e5d728ecacb7f0) > > $ nm /usr/local/bin/rados|grep ZN5MutexC1ERKSsbbbP11CephContext > 0000000000513790 T _ZN5MutexC1ERKSsbbbP11CephContext > > What OS/environment is this in and is there anything unusual about it or the > build environment or build process? > > What does the following command output? > > $ `which rados` -v Hehe, of course you can't do this because getting it to run is the problem isn't it? :P Try this instead. $ strings `which rados`|grep "^ceph version" -A5 > > > > > Thanks, > > Aakanksha > > > > -----Original Message----- > > From: Brad Hubbard [mailto:bhubbard@xxxxxxxxxx] > > Sent: Wednesday, August 26, 2015 5:46 PM > > To: Aakanksha Pudipeddi-SSI > > Cc: Jason Dillaman; ceph-users@xxxxxxxx > > Subject: Re: Rados: Undefined symbol error > > > > ----- Original Message ----- > > > From: "Aakanksha Pudipeddi-SSI" <aakanksha.pu@xxxxxxxxxxxxxxx> > > > To: "Jason Dillaman" <dillaman@xxxxxxxxxx> > > > Cc: ceph-users@xxxxxxxx > > > Sent: Thursday, 27 August, 2015 6:22:45 AM > > > Subject: Re: Rados: Undefined symbol error > > > > > > Hello Jason, > > > > > > I checked the version of my built packages and they are all 9.0.2. I > > > purged the cluster and uninstalled the packages and there seems to be > > > nothing else > > > - no older version. Could you elaborate on the fix for this issue? > > > > Some thoughts... > > > > # c++filt _ZN5MutexC1ERKSsbbbP11CephContext > > Mutex::Mutex(std::basic_string<char, std::char_traits<char>, > > std::allocator<char> > const&, bool, bool, bool, CephContext*) > > > > Thats from common/Mutex.cc > > > > # nm --dynamic `which rados` 2>&1|grep Mutex > > 0000000000504da0 T _ZN5Mutex4LockEb > > 0000000000504f70 T _ZN5Mutex6UnlockEv > > 0000000000504a50 T _ZN5MutexC1EPKcbbbP11CephContext > > 0000000000504a50 T _ZN5MutexC2EPKcbbbP11CephContext > > 0000000000504d10 T _ZN5MutexD1Ev > > 0000000000504d10 T _ZN5MutexD2Ev > > > > This shows my version is defined in the text section of the binary itself. > > What do you get when you run the above command? > > > > Like Jason says this is some sort of mis-match between your rados binary > > and > > your installed libs. > > > > HTH, > > Brad > > > > > > > > Thanks, > > > Aakanksha > > > > > > -----Original Message----- > > > From: Jason Dillaman [mailto:dillaman@xxxxxxxxxx] > > > Sent: Friday, August 21, 2015 6:37 AM > > > To: Aakanksha Pudipeddi-SSI > > > Cc: ceph-users@xxxxxxxx > > > Subject: Re: Rados: Undefined symbol error > > > > > > It sounds like you have rados CLI tool from an earlier Ceph release (< > > > Hammer) installed and it is attempting to use the librados shared > > > library from a newer (>= Hammer) version of Ceph. > > > > > > Jason > > > > > > > > > ----- Original Message ----- > > > > > > > From: "Aakanksha Pudipeddi-SSI" <aakanksha.pu@xxxxxxxxxxxxxxx> > > > > To: ceph-users@xxxxxxxx > > > > Sent: Thursday, August 20, 2015 11:47:26 PM > > > > Subject: Rados: Undefined symbol error > > > > > > > Hello, > > > > > > > I cloned the master branch of Ceph and after setting up the cluster, > > > > when I tried to use the rados commands, I got this error: > > > > > > > rados: symbol lookup error: rados: undefined symbol: > > > > _ZN5MutexC1ERKSsbbbP11CephContext > > > > > > > I saw a similar post here: http://tracker.ceph.com/issues/12563 but > > > > I am not clear on the solution for this problem. I am not performing > > > > an upgrade here but the error seems to be similar. Could anybody > > > > shed more light on the issue and how to solve it? Thanks a lot! > > > > > > > Aakanksha > > > > > > > _______________________________________________ > > > > ceph-users mailing list > > > > ceph-users@xxxxxxxxxxxxxx > > > > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com > > > _______________________________________________ > > > ceph-users mailing list > > > ceph-users@xxxxxxxxxxxxxx > > > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com > > > > > > _______________________________________________ > ceph-users mailing list > ceph-users@xxxxxxxxxxxxxx > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com > _______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
 |