On Tue, 25 Aug 2015, Deneau, Tom wrote: > > -----Original Message----- > > From: ceph-devel-owner@xxxxxxxxxxxxxxx [mailto:ceph-devel- > > owner@xxxxxxxxxxxxxxx] On Behalf Of Deneau, Tom > > Sent: Tuesday, August 25, 2015 1:24 PM > > To: Sage Weil > > Cc: ceph-devel@xxxxxxxxxxxxxxx; ceph-users@xxxxxxxx; > > piotr.dalek@xxxxxxxxxxxxxx > > Subject: RE: rados bench object not correct errors on v9.0.3 > > > > > > > > > -----Original Message----- > > > From: Sage Weil [mailto:sweil@xxxxxxxxxx] > > > Sent: Tuesday, August 25, 2015 12:43 PM > > > To: Deneau, Tom > > > Cc: ceph-devel@xxxxxxxxxxxxxxx; ceph-users@xxxxxxxx; > > > piotr.dalek@xxxxxxxxxxxxxx > > > Subject: Re: rados bench object not correct errors on v9.0.3 > > > > > > On Tue, 25 Aug 2015, Deneau, Tom wrote: > > > > > -----Original Message----- > > > > > From: ceph-devel-owner@xxxxxxxxxxxxxxx [mailto:ceph-devel- > > > > > owner@xxxxxxxxxxxxxxx] On Behalf Of Sage Weil > > > > > Sent: Monday, August 24, 2015 12:45 PM > > > > > To: ceph-announce@xxxxxxxx; ceph-devel@xxxxxxxxxxxxxxx; > > > > > ceph-users@xxxxxxxx; ceph-maintainers@xxxxxxxx > > > > > Subject: v9.0.3 released > > > > > > > > > > This is the second to last batch of development work for the > > > > > Infernalis cycle. The most intrusive change is an internal (non > > > > > user-visible) change to the OSD's ObjectStore interface. Many > > > > > fixes and improvements elsewhere across RGW, RBD, and another big > > > > > pile of > > > CephFS scrub/repair improvements. > > > > > > > > > > > > > > > Getting Ceph > > > > > ------------ > > > > > > > > > > * Git at git://github.com/ceph/ceph.git > > > > > * Tarball at http://ceph.com/download/ceph-9.0.3.tar.gz > > > > > * For packages, see > > > > > http://ceph.com/docs/master/install/get-packages > > > > > * For ceph-deploy, see > > > > > http://ceph.com/docs/master/install/install-ceph- > > > > > deploy > > > > > -- > > > > > To unsubscribe from this list: send the line "unsubscribe > > > > > ceph-devel" in the body of a message to majordomo@xxxxxxxxxxxxxxx > > > > > More majordomo info at http://vger.kernel.org/majordomo-info.html > > > > > > > > I have built rpms from the tarball http://ceph.com/download/ceph- > > > 9.0.3.tar.bz2. > > > > Have done this for fedora 21 x86_64 and for aarch64. On both > > > > platforms when I run a single node "cluster" with a few osds and run > > > > rados bench read tests (either seq or rand) I get occasional reports > > > > like > > > > > > > > benchmark_data_myhost_20729_object73 is not correct! > > > > > > > > I never saw these with similar rpm builds on these platforms from > > > > 9.0.2 > > > sources. > > > > > > > > Also, if I go to an x86-64 system running Ubuntu trusty for which I > > > > am able to install prebuilt binary packages via > > > > ceph-deploy install --dev v9.0.3 > > > > > > > > I do not see the errors there. > > > > > > Hrm.. haven't seen it on this end, but we're running/testing master > > > and not > > > 9.0.2 specifically. If you can reproduce this on master, that'd be > > > very helpful! > > > > > > There have been some recent changes to rados bench... Piotr, does this > > > seem like it might be caused by your changes? > > > > > > sage > > > > > > > Just as a reminder this is with 9.0.3, not 9.0.2. > > > > I just tried with the osds running on the fedora machine (with rpms that I > > built from the tarball) and rados bench running on the Ubuntu machine (with > > pre-built binary packages) and I do not see the errors with that combination. > > > > Will see what happens with master. > > > > -- Tom > > > > For making a tarball to build rpms from master, I did the following steps: > > # git checkout master > # ./autogen.sh > # ./configure > # make dist-bzip2 > > then put the .bz2 file in the rpmbuild/SOURCES and put the spec file in rpmbuild/SPECS > > Are those the correct steps? Asking because when I do rpmbuild from the above I eventually get > > Processing files: ceph-9.0.3-0.fc21.x86_64 > error: File not found: /root/rpmbuild/BUILDROOT/ceph-9.0.3-0.fc21.x86_64/usr/sbin/ceph-disk-activate > error: File not found: /root/rpmbuild/BUILDROOT/ceph-9.0.3-0.fc21.x86_64/usr/sbin/ceph-disk-prepare Not sure about the steps (I haven't built RPMs that way), but from teh error it looks like you're using an older spec file.. ceph-disk-{activate,prepare} are no longer built or packaged. sage _______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
 |