Did not work.
$ ls -l /usr/lib64/|grep liburcu-bp
lrwxrwxrwx 1 root root 19 May 10 05:27 liburcu-bp.so -> liburcu-bp.so.2.0.0
lrwxrwxrwx 1 root root 19 May 10 05:26 liburcu-bp.so.2 -> liburcu-bp.so.2.0.0
-rwxr-xr-x 1 root root 32112 Feb 25 20:27 liburcu-bp.so.2.0.0
Can you point me which package has the /usr/lib64/liburcu-bp.la libtools file.
Regards
Srikanth
On Mon, May 11, 2015 at 3:30 AM, Alexandre DERUMIER <aderumier@xxxxxxxxx> wrote:
>>I tries searching on internet and could not find a el7 package with liburcu-bp.la file, let me know which rpm package has this libtool archive.
Hi, maybe can you try
./install-deps.sh
to install needed dependencies.
----- Mail original -----
De: "Srikanth Madugundi" <srikanth.madugundi@xxxxxxxxx>
À: "Somnath Roy" <Somnath.Roy@xxxxxxxxxxx>
Cc: "ceph-users" <ceph-users@xxxxxxxx>
Envoyé: Dimanche 10 Mai 2015 08:21:06
Objet: Re: osd does not start when object store is set to "newstore"
Hi,
Thanks a lot Somnath for the help. I tried to change "./autogen.sh" to "./do_autogen.sh -r" but see this error during building process. I tried searching
CC libosd_tp_la-osd.lo
CC libosd_tp_la-pg.lo
CC librbd_tp_la-librbd.lo
CC librados_tp_la-librados.lo
CC libos_tp_la-objectstore.lo
CCLD libosd_tp.la
/usr/bin/grep: /usr/lib64/ liburcu-bp.la : No such file or directory
/usr/bin/sed: can't read /usr/lib64/ liburcu-bp.la : No such file or directory
libtool: link: `/usr/lib64/ liburcu-bp.la ' is not a valid libtool archive
PLEASE NOTE: The information contained in this electronic mail message is intended only for the use of the designated recipient(s) named above. If the reader of this message is not the intended recipient, you are hereby notified that you have received this message in error and that any review, dissemination, distribution, or copying of this message is strictly prohibited. If you have received this communication in error, please notify the sender by telephone or e-mail (as shown above) immediately and destroy any and all copies of this message in your possession (whether hard copies or electronically stored copies).make[5]: *** [ libosd_tp.la ] Error 1
make[5]: *** Waiting for unfinished jobs....
make[5]: Leaving directory `/home/srikanth/rpmbuild/BUILD/ceph-0.93/src/tracing'
make[4]: *** [all] Error 2
make[4]: Leaving directory `/home/srikanth/rpmbuild/BUILD/ceph-0.93/src/tracing'
make[3]: *** [all-recursive] Error 1
make[3]: Leaving directory `/home/srikanth/rpmbuild/BUILD/ceph-0.93/src'
make[2]: *** [all] Error 2
make[2]: Leaving directory `/home/srikanth/rpmbuild/BUILD/ceph-0.93/src'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/srikanth/rpmbuild/BUILD/ceph-0.93'
error: Bad exit status from /var/tmp/rpm-tmp.WEQTYW (%build)
I have the following package installed.
$ rpm -qa |grep userspace
userspace-rcu-devel-0.8.6-1.fc23.x86_64
userspace-rcu-0.8.6-1.fc23.x86_64
I tries searching on internet and could not find a el7 package with liburcu-bp.la file, let me know which rpm package has this libtool archive.
Regards
Srikanth
On Fri, May 8, 2015 at 10:41 AM, Somnath Roy < Somnath.Roy@xxxxxxxxxxx > wrote:
I think you need to build code with rocksdb enabled if you are not already doing this.
Go to root folder and try this..
./do_autogen.sh –r
Thanks & Regards
Somnath
From: Srikanth Madugundi [mailto: srikanth.madugundi@xxxxxxxxx ]
Sent: Friday, May 08, 2015 10:33 AM
To: Somnath Roy
Cc: ceph-users@xxxxxxxx
Subject: Re: osd does not start when object store is set to "newstore"
I tried adding "enable experimental unrecoverable data corrupting features = newstore rocksdb" but no luck.
Here is the config I am using.
[global]
.
.
.
osd objectstore = newstore
newstore backend = rocksdb
enable experimental unrecoverable data corrupting features = newstore rocksdb
Regards
-Srikanth
On Thu, May 7, 2015 at 10:59 PM, Somnath Roy < Somnath.Roy@xxxxxxxxxxx > wrote:
I think you need to add the following..
enable experimental unrecoverable data corrupting features = newstore rocksdb
Thanks & Regards
Somnath
From: ceph-users [mailto: ceph-users-bounces@xxxxxxxxxxxxxx ] On Behalf Of Srikanth Madugundi
Sent: Thursday, May 07, 2015 10:56 PM
To: ceph-users@xxxxxxxx
Subject: osd does not start when object store is set to "newstore"
Hi,
I built and installed ceph source from (wip-newstore) branch and could not start osd with "newstore" as osd objectstore.
$ sudo /usr/bin/ceph-osd -i 0 --pid-file /var/run/ceph/osd.0.pid -c /etc/ceph/ceph.conf --cluster ceph -f
2015-05-08 05:49:16.130073 7f286be01880 -1 unable to create object store
$
#### ceph.config ( I have the following settings in ceph.conf)
[global]
osd objectstore = newstore
newstore backend = rocksdb
enable experimental unrecoverable data corrupting features = newstore
The logs does not show much details.
$ tail -f /var/log/ceph/ceph-osd.0.log
2015-05-08 00:01:54.331136 7fb00e07c880 0 ceph version (), process ceph-osd, pid 23514
2015-05-08 00:01:54.331202 7fb00e07c880 -1 unable to create object store
Am I missing something?
Regards
Srikanth
_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
_______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
