|
Hi Everyone
I am using the ceph-disk command to prepare disks for an OSD. The command is: ceph-disk prepare --zap-disk --cluster $CLUSTERNAME --cluster-uuid $CLUSTERUUID --fs-type xfs /dev/${1}
and this consistently raises the following error on RHEL7.1 and Ceph Hammer viz: partx: specified range <1:0> does not make sense partx: /dev/sdb: error adding partition 2 partx: /dev/sdb: error adding partitions 1-2 partx: /dev/sdb: error adding partitions 1-2 I have had similar errors on previous versions of Ceph and RHEL. We have decided to stick with Hammer/7.1 and I am interested if anybody has any comment on this. The error seems to do no harm so is probably cosmetic but on principle at least I would al least like to know if I can safely ignore this. Many thanks. Regards Paul Hewlett
Senior Systems Engineer Velocix, Cambridge Alcatel-Lucent t: +44 1223 435893 m: +44 7985327353 |
_______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
