I'm having a similar issue.
I'm following http://ceph.com/docs/master/install/manual-deployment/ to a T.
I have OSDs on the same host deployed with the short-form and they work fine. I am trying to deploy some more via the long form (because I want them to appear in a different location in the crush map). Everything through step 10 (i.e. ceph osd crush add {id-or-name} {weight} [{bucket-type}={bucket-name} ...] ) works just fine. When I go to step 11 (sudo /etc/init.d/ceph start osd.{osd-num}) I get:
/etc/init.d/ceph: osd.16 not found (/etc/ceph/ceph.conf defines mon.hobbit01 osd.7 osd.15 osd.10 osd.9 osd.1 osd.14 osd.2 osd.3 osd.13 osd.8 osd.12 osd.6 osd.11 osd.5 osd.4 osd.0 , /var/lib/ceph defines mon.hobbit01 osd.7 osd.15 osd.10 osd.9 osd.1 osd.14 osd.2 osd.3 osd.13 osd.8 osd.12 osd.6 osd.11 osd.5 osd.4 osd.0)
On Wed, Feb 25, 2015 at 11:55 AM, Travis Rhoden <trhoden@xxxxxxxxx> wrote:
Also, did you successfully start your monitor(s), and define/create the OSDs within the Ceph cluster itself?There are several steps to creating a Ceph cluster manually. I'm unsure if you have done the steps to actually create and register the OSDs with the cluster.- TravisOn Wed, Feb 25, 2015 at 9:49 AM, Leszek Master <keksior@xxxxxxxxx> wrote:Check firewall rules and selinux. It sometimes is a pain in the ... :)
25 lut 2015 01:46 "Barclay Jameson" <almightybeeij@xxxxxxxxx> napisał(a):I have tried to install ceph using ceph-deploy but sgdisk seems to
have too many issues so I did a manual install. After mkfs.btrfs on
the disks and journals and mounted them I then tried to start the osds
which failed. The first error was:
#/etc/init.d/ceph start osd.0
/etc/init.d/ceph: osd.0 not found (/etc/ceph/ceph.conf defines ,
/var/lib/ceph defines )
I then manually added the osds to the conf file with the following as
an example:
[osd.0]
osd_host = node01
Now when I run the command :
# /etc/init.d/ceph start osd.0
There is no error or output from the command and in fact when I do a
ceph -s no osds are listed as being up.
Doing as ps aux | grep -i ceph or ps aux | grep -i osd shows there are
no osd running.
I also have done htop to see if any process are running and none are shown.
I had this working on SL6.5 with Firefly but Giant on Centos 7 has
been nothing but a giant pain.
_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
_______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
