add the '-n client.radosgw.gateway' param when you're running the gateway, all your settings are under that user. Yehuda ----- Original Message ----- > From: "B L" <super.iterator@xxxxxxxxx> > To: "Yehuda Sadeh-Weinraub" <yehuda@xxxxxxxxxx> > Cc: ceph-users@xxxxxxxxxxxxxx > Sent: Saturday, February 14, 2015 2:56:54 PM > Subject: Re: Having problem to start Radosgw > > Yehuda .. > > In case you will need to know more about my system > > Here is my full cluster configuration: > https://gist.github.com/anonymous/fb4c314320d7df75569a > > And, that’s my ceph cluster status: > > $ ceph -s > > cluster 17bea68b-1634-4cd1-8b2a-00a60ef4761d > health HEALTH_WARN 203 pgs degraded; 203 pgs stuck unclean; recovery 6/151 > objects degraded (3.974%) > monmap e1: 1 mons at {ceph-node1=172.31.0.84:6789/0}, election epoch 2, > quorum 0 ceph-node1 > osdmap e93: 6 osds: 6 up, 6 in > pgmap v3676: 1920 pgs, 16 pools, 10241 kB data, 51 objects > 279 MB used, 18086 MB / 18365 MB avail > 6/151 objects degraded (3.974%) > 203 active+degraded > 1717 active+clean > > It was fully healthy before adding the radosgw pools .. yet, I still can put > objects to the cluster (without using RGW) > > Best! > > > > > > On Feb 15, 2015, at 12:39 AM, B L < super.iterator@xxxxxxxxx > wrote: > > That’s what I usually do to check if rgw is running with no problems: sudo > radosgw -c ceph.conf -d > > I already pumped up the log level, but I can’t see any change or verbosity > level increase of the logs, I still get the same: > > 2015-02-14 22:27:57.513151 7f26c79d27c0 0 ceph version 0.80.7 > (6c0127fcb58008793d3c8b62d925bc91963672a3), process radosgw, pid 7924 > 2015-02-14 22:27:57.573564 7f26c79d27c0 0 framework: fastcgi > 2015-02-14 22:27:57.573569 7f26c79d27c0 0 starting handler: fastcgi > 2015-02-14 22:27:57.575349 7f269affd700 0 ERROR: FCGX_Accept_r returned -9 > 2015-02-14 22:27:57.670610 7f269bfff700 0 ERROR: can't read user header: > ret=-2 > 2015-02-14 22:27:57.670613 7f269bfff700 0 ERROR: sync_user() failed, > user=cephtest ret=-2 > 2015-02-14 22:27:57.671382 7f269bfff700 0 ERROR: can't read user header: > ret=-2 > 2015-02-14 22:27:57.671384 7f269bfff700 0 ERROR: sync_user() failed, > user=cephtestss ret=-2 > ^C2015-02-14 22:28:30.693140 7f269b7fe700 1 handle_sigterm > 2015-02-14 22:28:30.693170 7f269b7fe700 1 handle_sigterm set alarm for 120 > 2015-02-14 22:28:30.693179 7f26c79d27c0 -1 shutting down > 2015-02-14 22:28:30.717340 7f26c79d27c0 1 final shutdown > > Please let me know if I can do something more .. > > Now I have 2 questions: > 1- what RADOS user you refer to? > 2- How would I know that I use wrong cephx keys unless I see authentication > error or relevant warning? > > Thanks! > Beanos > > > > > On Feb 14, 2015, at 11:29 PM, Yehuda Sadeh-Weinraub < yehuda@xxxxxxxxxx > > wrote: > > > > > > > From: "B L" < super.iterator@xxxxxxxxx > > To: "Yehuda Sadeh-Weinraub" < yehuda@xxxxxxxxxx > > Cc: ceph-users@xxxxxxxxxxxxxx > Sent: Saturday, February 14, 2015 11:03:42 AM > Subject: Re: Having problem to start Radosgw > > Hello Yehyda, > > The strace command you referred to me, shows this: > https://gist.github.com/anonymous/8e9f1ced485996a263bb > > Additionally, I traced this log file: > /var/log/radosgw/ceph-client.radosgw.gateway > > it has the following: > > 2015-02-12 18:23:32.247679 7fecca5257c0 -1 did not load config file, using > default settings. > 2015-02-12 18:23:32.247745 7fecca5257c0 0 ceph version 0.80.7 > (6c0127fcb58008793d3c8b62d925bc91963672a3), process radosgw, pid 20477 > 2015-02-12 18:23:32.251192 7fecca5257c0 -1 Couldn't init storage provider > (RADOS) > 2015-02-12 18:23:58.494026 7faab31377c0 -1 did not load config file, using > default settings. > 2015-02-12 18:23:58.494092 7faab31377c0 0 ceph version 0.80.7 > (6c0127fcb58008793d3c8b62d925bc91963672a3), process radosgw, pid 20509 > 2015-02-12 18:23:58.497420 7faab31377c0 -1 Couldn't init storage provider > (RADOS) > 2015-02-14 17:13:03.478688 7f86f09567c0 -1 did not load config file, using > default settings. > 2015-02-14 17:13:03.478778 7f86f09567c0 0 ceph version 0.80.7 > (6c0127fcb58008793d3c8b62d925bc91963672a3), process radosgw, pid 2989 > 2015-02-14 17:13:03.482850 7f86f09567c0 -1 Couldn't init storage provider > (RADOS) > 2015-02-14 17:13:29.477530 7ff18226a7c0 -1 did not load config file, using > default settings. > 2015-02-14 17:13:29.477595 7ff18226a7c0 0 ceph version 0.80.7 > (6c0127fcb58008793d3c8b62d925bc91963672a3), process radosgw, pid 3033 > 2015-02-14 17:13:29.481173 7ff18226a7c0 -1 Couldn't init storage provider > (RADOS) > 2015-02-14 17:21:00.950847 7ffee3a3b7c0 -1 did not load config file, using > default settings. > 2015-02-14 17:21:00.950916 7ffee3a3b7c0 0 ceph version 0.80.7 > (6c0127fcb58008793d3c8b62d925bc91963672a3), process radosgw, pid 3086 > 2015-02-14 17:21:00.954085 7ffee3a3b7c0 -1 Couldn't init storage provider > (RADOS) > > > > Turns out to be that the last line of the logs is thrown out by this piece of > code in rgw_main.cc: > > … > … > > FCGX_Init(); > > RGWStoreManager store_manager; > > if (!store_manager.init("rados", g_ceph_context)) { > derr << "Couldn't init storage provider (RADOS)" << dendl; > return EIO; > } > > RGWProcess process(g_ceph_context, 20); > > process.run(); > > return 0; > > N.B. you can find it in:( > http://workbench.dachary.org/ceph/ceph/raw/8d63e140777bbdd061baa6845d57e6c3cc771f76/src/rgw/rgw_main.cc > ) , 10th line from below. > > Is that by any means related to the problem? > > Not related. This actually means that it couldn't connect to the rados > backend, so there's a different issue now. The strace log doesn't provide > much with regard to the original issue as it didn't get to that part now. > You can try bumping up the debug level (debug rgw = 20, debug ms = 1). I > assume that the issue that you're seeing is that the wrong rados user and/or > wrong cephx keys are being used. Try to run it again as you do usually, and > see what the regular params that are being passed when starting radosgw; use > these when running the strace command. > > Yehuda > > > > > > > > > > On Feb 14, 2015, at 7:24 PM, Yehuda Sadeh-Weinraub < yehuda@xxxxxxxxxx > > wrote: > > sudo strace -F -T -tt -o/tmp/strace.out radosgw -c ceph.conf -f > > > > > > _______________________________________________ > ceph-users mailing list > ceph-users@xxxxxxxxxxxxxx > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com > _______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
 |