That’s what I usually do to check if rgw is running with no problems: sudo radosgw -c ceph.conf -d I already pumped up the log level, but I can’t see any change or verbosity level increase of the logs, I still get the same: 2015-02-14 22:27:57.513151 7f26c79d27c0 0 ceph version 0.80.7 (6c0127fcb58008793d3c8b62d925bc91963672a3), process radosgw, pid 7924 2015-02-14 22:27:57.573564 7f26c79d27c0 0 framework: fastcgi 2015-02-14 22:27:57.573569 7f26c79d27c0 0 starting handler: fastcgi 2015-02-14 22:27:57.575349 7f269affd700 0 ERROR: FCGX_Accept_r returned -9 2015-02-14 22:27:57.670610 7f269bfff700 0 ERROR: can't read user header: ret=-2 2015-02-14 22:27:57.670613 7f269bfff700 0 ERROR: sync_user() failed, user=cephtest ret=-2 2015-02-14 22:27:57.671382 7f269bfff700 0 ERROR: can't read user header: ret=-2 2015-02-14 22:27:57.671384 7f269bfff700 0 ERROR: sync_user() failed, user=cephtestss ret=-2 ^C2015-02-14 22:28:30.693140 7f269b7fe700 1 handle_sigterm 2015-02-14 22:28:30.693170 7f269b7fe700 1 handle_sigterm set alarm for 120 2015-02-14 22:28:30.693179 7f26c79d27c0 -1 shutting down 2015-02-14 22:28:30.717340 7f26c79d27c0 1 final shutdown Please let me know if I can do something more .. Now I have 2 questions: 1- what RADOS user you refer to? 2- How would I know that I use wrong cephx keys unless I see authentication error or relevant warning? Thanks! Beanos
|
_______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com