Thanks for spotting the inconsistency. The 7100 number is out of date, the upper port bound has been 7300 for some time. The 7810 number does indeed look like a simple typo. The 6810 number is an example rather than the upper bound -- the body of the text explains that it is up to the administrator to decide how many ports they need to open. However, it's kind of easy to miss so I've also added a patch to make that more explicit in the OSD case. Updates here: https://github.com/ceph/ceph/pull/3667 John On Sun, Feb 8, 2015 at 12:32 PM, Georgios Dimitrakakis <giorgis@xxxxxxxxxxxx> wrote: > By the way, > > on the link that John send I believe there is a typo. > > In the very beginning of the "Open Required Ports" session the port range > says 6800:7810 where below is > mentioned as 6800:7100. > > I think that the former is a typo based on previous documentation where the > ports where declared to be 6800:6810. > > Furthermore the same inconsistency on ports is observed at the "Network > Configuration Reference" here: > http://docs.ceph.com/docs/master/rados/configuration/network-config-ref/ > > Some times they are mentioned as 6800:7100 while others 6800:6810 > > > Should I file a bug for this? > > > Regards, > > > George > > > > >> Hi John, >> >> I have already put these rules in the firewall but no luck. >> >> Using "iptraf" I saw that every time is going at a TCP port 33000 >> plus something...different every time! >> >> Best, >> >> George >> >> On Sat, 7 Feb 2015 18:40:38 +0100, John Spray wrote: >>> >>> The relevant docs are here: >>> >>> >>> http://ceph.com/docs/master/start/quick-start-preflight/#open-required-ports >>> >>> John >>> >>> On Sat, Feb 7, 2015 at 4:33 PM, Georgios Dimitrakakis >>> <giorgis@xxxxxxxxxxxx> wrote: >>>> >>>> Hi all! >>>> >>>> I am integrating my OpenStack Cluster with CEPH in order to be able to >>>> provide volumes for the instances! >>>> >>>> I have managed to perform all operations successfully with one catch >>>> only. >>>> >>>> If firewall services (iptables) are running on the CEPH node then I am >>>> stack >>>> at attaching state. >>>> >>>> Therefore can you please elaborate on which ports should be open on the >>>> CEPH >>>> node in order to function without a problem? >>>> >>>> >>>> Best regards, >>>> >>>> >>>> George >>>> _______________________________________________ >>>> ceph-users mailing list >>>> ceph-users@xxxxxxxxxxxxxx >>>> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com >> >> _______________________________________________ >> ceph-users mailing list >> ceph-users@xxxxxxxxxxxxxx >> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com > > _______________________________________________ > ceph-users mailing list > ceph-users@xxxxxxxxxxxxxx > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com _______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
 |