By the way,
on the link that John send I believe there is a typo.
In the very beginning of the "Open Required Ports" session the port
range says 6800:7810 where below is
mentioned as 6800:7100.
I think that the former is a typo based on previous documentation where
the ports where declared to be 6800:6810.
Furthermore the same inconsistency on ports is observed at the "Network
Configuration Reference" here:
http://docs.ceph.com/docs/master/rados/configuration/network-config-ref/
Some times they are mentioned as 6800:7100 while others 6800:6810
Should I file a bug for this?
Regards,
George
Hi John,
I have already put these rules in the firewall but no luck.
Using "iptraf" I saw that every time is going at a TCP port 33000
plus something...different every time!
Best,
George
On Sat, 7 Feb 2015 18:40:38 +0100, John Spray wrote:
The relevant docs are here:
http://ceph.com/docs/master/start/quick-start-preflight/#open-required-ports
John
On Sat, Feb 7, 2015 at 4:33 PM, Georgios Dimitrakakis
<giorgis@xxxxxxxxxxxx> wrote:
Hi all!
I am integrating my OpenStack Cluster with CEPH in order to be able
to
provide volumes for the instances!
I have managed to perform all operations successfully with one
catch only.
If firewall services (iptables) are running on the CEPH node then I
am stack
at attaching state.
Therefore can you please elaborate on which ports should be open on
the CEPH
node in order to function without a problem?
Best regards,
George
_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
