Hi, Last sunday I got a call early in the morning that a Ceph cluster was having some issues. Slow requests and OSDs marking each other down. Since this is a 100% SSD cluster I was a bit confused and started investigating. It took me about 15 minutes to see that fstrim was running and was utilizing the SSDs 100%. On Ubuntu 14.04 there is a weekly CRON which executes fstrim-all. It detects all mountpoints which can be trimmed and starts to trim those. On the Intel SSDs used here it caused them to become 100% busy for a couple of minutes. That was enough for them to no longer respond on heartbeats, thus timing out and being marked down. Luckily we had the "out interval" set to 1800 seconds on that cluster, so no OSD was marked as "out". fstrim-all does not execute fstrim with a ionice priority. From what I understand, but haven't tested yet, is that running fstrim with ionice -c Idle should solve this. It's weird that this issue didn't come up earlier on that cluster, but after killing fstrim all problems we resolved and the cluster ran happily again. So watch out for fstrim on early Sunday mornings on Ubuntu! -- Wido den Hollander 42on B.V. Ceph trainer and consultant Phone: +31 (0)20 700 9902 Skype: contact42on _______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
 |