I would run that one command (sudo ceph-disk -v activate --mark-init sysvinit --mount /data/osd ) on the hp10 box and see what is going on when you do so. On Thu, Sep 18, 2014 at 12:09 PM, BG <bglackin at nyx.com> wrote: > I've hit a timeout issue on calls to ceph-disk activate. > > Initially, I followed the 'Storage Cluster Quick Start' on the CEPH website to > get a cluster up and running. I wanted to tweak the configuration however and > decided to blow away the initial setup using the purge / purgedata / forgetkeys > commands with ceph-deploy. > > Next time around I'm getting a timeout error when attempting to activate an OSD > on two out of the three boxes I'm using: > [ceph_deploy.cli][INFO ] Invoked (1.5.15): /usr/bin/ceph-deploy osd activate > hp10:/data/osd > [ceph_deploy.osd][DEBUG ] Activating cluster ceph disks hp10:/data/osd: > [hp10][DEBUG ] connected to host: hp10 > [hp10][DEBUG ] detect platform information from remote host > [hp10][DEBUG ] detect machine type > [ceph_deploy.osd][INFO ] Distro info: CentOS Linux 7.0.1406 Core > [ceph_deploy.osd][DEBUG ] activating host hp10 disk /data/osd > [ceph_deploy.osd][DEBUG ] will use init type: sysvinit > [hp10][INFO ] Running command: sudo ceph-disk -v activate --mark-init sysvinit > --mount /data/osd > [hp10][WARNIN] No data was received after 300 seconds, disconnecting... > [hp10][INFO ] checking OSD status... > [hp10][INFO ] Running command: sudo ceph --cluster=ceph osd stat --format=json > > This is on CentOS 7, ceph-deploy version is 1.5.15. The firewalld service is > disabled, network connectivity should be good as the cluster previously worked > on these boxes. > > Any suggestions where I should start looking to track down the root cause > of the timeout? > > _______________________________________________ > ceph-users mailing list > ceph-users at lists.ceph.com > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
 |