Thanks a lot. yes u are correct. i can use connect the upcase target name in Linux but can not in Windows. after i change the target name to lowcase. Windows work fine too. 2014-07-22 22:13 GMT+07:00 Uwe Grohnwaldt <uwe at grohnwaldt.eu>: > Hi, > > please try a targetname without uppercase characters and without any other > special characters: > "Uppercase characters are always mapped to lowercase characters." > > http://technet.microsoft.com/en-us/library/ee338474(v=ws.10).aspx > > Mit freundlichen Gr??en / Best Regards, > -- > Consultant > Dipl.-Inf. Uwe Grohnwaldt > Gutleutstr. 351 > 60327 Frankfurt a. M. > > eMail: uwe at grohnwaldt.eu > Telefon: +49-69-34878906 > Mobil: +49-172-3209285 > Fax: +49-69-348789069 > > > -----Original Message----- > > From: ceph-users [mailto:ceph-users-bounces at lists.ceph.com] On Behalf Of > > ???? > > Sent: Dienstag, 22. Juli 2014 16:42 > > To: ceph-users at lists.ceph.com > > Subject: [ceph-users] ceph tgt iscsi target can be discovered but not > active. > > > > Dear all , > > i have install tgt from http://ceph.com/packages/ceph-extras/debian > > have create pool and image for iscsi. > > but when i want to connect this iscsi from windows 2008 iscsi initiator, > can > > find, but status is not active . i do not know why? > > > > ############ some step i made for ceph iscsi target ##### rbd create > > volume20G --size 20480 --pool iscsi > > > > > > root at ceph-admin:~# rados -p iscsi ls > > volume20G.rbd > > rbd_directory > > > > vi /etc/tgt/targets.conf > > <target iqn.2014-07.ceph-admin.lab.com:volume20G> > > driver iscsi > > bs-type rbd > > backing-store iscsi/volume20G > > initiator-address ALL > > </target> > > > > root at ceph-admin:~/my-cluster# tgtadm -s > > Target 1: iqn.2014-07.ceph-admin.lab.com:volume20G > > System information: > > Driver: iscsi > > State: ready > > I_T nexus information: > > LUN information: > > LUN: 0 > > Type: controller > > SCSI ID: IET 00010000 > > SCSI SN: beaf10 > > Size: 0 MB, Block size: 1 > > Online: Yes > > Removable media: No > > Prevent removal: No > > Readonly: No > > SWP: No > > Thin-provisioning: No > > Backing store type: null > > Backing store path: None > > Backing store flags: > > LUN: 1 > > Type: disk > > SCSI ID: IET 00010001 > > SCSI SN: beaf11 > > Size: 21475 MB, Block size: 512 > > Online: Yes > > Removable media: No > > Prevent removal: No > > Readonly: No > > SWP: No > > Thin-provisioning: No > > Backing store type: rbd > > Backing store path: iscsi/volume20G > > Backing store flags: > > Account information: > > ACL information: > > ALL > > > _______________________________________________ > ceph-users mailing list > ceph-users at lists.ceph.com > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.ceph.com/pipermail/ceph-users-ceph.com/attachments/20140722/75706447/attachment.htm>
 |