Dear all , i have install tgt from http://ceph.com/packages/ceph-extras/debian have create pool and image for iscsi. but when i want to connect this iscsi from windows 2008 iscsi initiator, can find, but status is not active . i do not know why? ############ some step i made for ceph iscsi target ##### rbd create volume20G --size 20480 --pool iscsi root at ceph-admin:~# rados -p iscsi ls volume20G.rbd rbd_directory vi /etc/tgt/targets.conf <target iqn.2014-07.ceph-admin.lab.com:volume20G> driver iscsi bs-type rbd backing-store iscsi/volume20G initiator-address ALL </target> root at ceph-admin:~/my-cluster# tgtadm -s Target 1: iqn.2014-07.ceph-admin.lab.com:volume20G System information: Driver: iscsi State: ready I_T nexus information: LUN information: LUN: 0 Type: controller SCSI ID: IET 00010000 SCSI SN: beaf10 Size: 0 MB, Block size: 1 Online: Yes Removable media: No Prevent removal: No Readonly: No SWP: No Thin-provisioning: No Backing store type: null Backing store path: None Backing store flags: LUN: 1 Type: disk SCSI ID: IET 00010001 SCSI SN: beaf11 Size: 21475 MB, Block size: 512 Online: Yes Removable media: No Prevent removal: No Readonly: No SWP: No Thin-provisioning: No Backing store type: rbd Backing store path: iscsi/volume20G Backing store flags: Account information: ACL information: ALL -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.ceph.com/pipermail/ceph-users-ceph.com/attachments/20140722/3593eba1/attachment.htm>
 |