Re: Gentoo & ceph 0.67 & pg stuck After fresh Installation

[Aaron Ten Clay <aarontc@xxxxxxxxxxx>]

Hi Philipp,

It sounds like perhaps you don't have any OSDs that are both "up" and "in" the cluster. Can you provide the output of "ceph health detail" and "ceph osd tree" for us?

As for the "howto" you mentioned, I added some notes to the top but never really updated the body of the document... I'm not entirely sure it's straightforward or up to date any longer :) I'd be happy to make changes as needed but I haven't manually deployed a cluster in several months, and Inktank now has a manual deployment guide for Ceph at http://ceph.com/docs/master/install/manual-deployment/

-Aaron

On Fri, Jan 10, 2014 at 6:57 AM, Philipp Strobl <philipp@xxxxxxxxxxxx> wrote:

Hi,

After managed to deploy ceph manual in gentoo (ceph-disk tools are under /usr/usr/sbin...), the daemons are coming properly up, but "ceph health" shows warn for all pgs stuck unclean.

This is a strange behavior for a clean new installtion i guess.

So the question is, do i'm something wrong Or can i reset the PGs for getting the Cluster Running ?

Also the rbd-Client Or Mount.ceph Hangs with no answer.

I used this howto: https://github.com/aarontc/ansible-playbooks/blob/master/roles/ceph.notes-on-deployment.rst

Resp. our German translation/expansion

http://wiki.open-laboratory.de/Intern:IT:HowTo:Ceph

With auth Support ... = none

Best regards 

And thank you in advance

Philipp Strobl

_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com

--
Aaron Ten Clay
http://www.aarontc.com/

_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com