|
Did you configure /root/.curlrc? Since ceph-deploy runs the commands with sudo I believe it will refer to the proxy files in /root/ instead of ~/. I configure both just to be safe. I just did a new ceph-deploy
on CentOS 6.4 this morning with these settings: [ceph@joceph01 ceph]$ sudo cat /root/.rpmmacros %_httpproxy proxy.intel.com %_httpport 123 [ceph@joceph01 ceph]$ sudo cat /root/.curlrc proxy=http://proxy.intel.com:123 [ceph@joceph01 ceph]$ sudo cat /etc/yum.conf | grep proxy proxy=http://proxy.intel.com:123 [ceph@joceph01 ceph]$ sudo cat /etc/wgetrc | grep proxy https_proxy = http://proxy.intel.com:123/ http_proxy = http://proxy.intel.com:123/ ftp_proxy = http://proxy.intel.com:123/ use_proxy = on [ceph@joceph01 ceph]$ sudo cat ~/.rpmmacros %_httpproxy proxy.intel.com %_httpport 123 [ceph@joceph01 ceph]$ sudo cat ~/.curlrc proxy=http://proxy.intel.com:123 From: Trivedi, Narendra [mailto:Narendra.Trivedi@xxxxxxxxxx]
Guys, I am still struggling with the installation. Seems proxy + ceph-deploy is a deadly combo. Look below:
[ceph_deploy.install][DEBUG ] Installing stable version dumpling on cluster ceph hosts ceph-node1-mon-centos-6-4
ceph-nod e2-osd0-centos-6-4 ceph-node3-osd1-centos-6-4 [ceph_deploy.install][DEBUG ] Detecting platform for host ceph-node1-mon-centos-6-4 ... [ceph_deploy.sudo_pushy][DEBUG ] will use a remote connection without sudo [ceph_deploy.install][INFO ] Distro info: CentOS 6.4 Final [ceph-node1-mon-centos-6-4][INFO ] installing ceph on ceph-node1-mon-centos-6-4 [ceph-node1-mon-centos-6-4][INFO ] adding EPEL repository [ceph-node1-mon-centos-6-4][INFO ] Running command: wget
http://dl.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8. noarch.rpm [ceph-node1-mon-centos-6-4][ERROR ] --2013-10-29 14:26:25--
http://dl.fedoraproject.org/pub/epel/6/x86_64/epel-release-6 -8.noarch.rpm [ceph-node1-mon-centos-6-4][ERROR ] Connecting to 10.12.132.208:8080... connected. [ceph-node1-mon-centos-6-4][ERROR ] Proxy request sent, awaiting response... 200 OK [ceph-node1-mon-centos-6-4][ERROR ] Length: 14540 (14K) [application/x-rpm] [ceph-node1-mon-centos-6-4][ERROR ] Saving to: `epel-release-6-8.noarch.rpm.6.1' [ceph-node1-mon-centos-6-4][ERROR ] 0K .......... .... 100% 5.90M=0.002s [ceph-node1-mon-centos-6-4][ERROR ] Last-modified header invalid -- time-stamp ignored. [ceph-node1-mon-centos-6-4][ERROR ] 2013-10-29 14:27:24 (5.90 MB/s) - `epel-release-6-8.noarch.rpm.6.1' saved
[14540/1454 0] [ceph-node1-mon-centos-6-4][INFO ] Running command: rpm -Uvh --replacepkgs epel-release-6*.rpm [ceph-node1-mon-centos-6-4][INFO ] Preparing... ################################################## [ceph-node1-mon-centos-6-4][INFO ] epel-release ################################################## [ceph-node1-mon-centos-6-4][ERROR ] warning: epel-release-6-8.noarch.rpm: Header V3 RSA/SHA256 Signature, key
ID 0608b895 : NOKEY [ceph-node1-mon-centos-6-4][INFO ] Running command: su -c 'rpm --import "https://ceph.com/git/?p=ceph.git;a=blob_plain;f =keys/release.asc"' [ceph-node1-mon-centos-6-4][ERROR ] Traceback (most recent call last): [ceph-node1-mon-centos-6-4][ERROR ] File "/usr/lib/python2.6/site-packages/ceph_deploy/hosts/centos/install.py",
line 2 3, in install [ceph-node1-mon-centos-6-4][ERROR ] File "/usr/lib/python2.6/site-packages/ceph_deploy/util/decorators.py",
line 10, in inner [ceph-node1-mon-centos-6-4][ERROR ] File "/usr/lib/python2.6/site-packages/ceph_deploy/util/wrappers.py", line
6, in re mote_call [ceph-node1-mon-centos-6-4][ERROR ] File "/usr/lib64/python2.6/subprocess.py", line 502, in check_call [ceph-node1-mon-centos-6-4][ERROR ] raise CalledProcessError(retcode, cmd) [ceph-node1-mon-centos-6-4][ERROR ] CalledProcessError: Command '['su -c \'rpm --import "https://ceph.com/git/?p=ceph.git ;a=blob_plain;f=keys/release.asc"\'']' returned non-zero exit status 1 [ceph-node1-mon-centos-6-4][ERROR ] curl: (7) couldn't connect to host [ceph-node1-mon-centos-6-4][ERROR ] error:
https://ceph.com/git/?p=ceph.git;a=blob_plain;f=keys/release.asc: import read failed(2). [ceph_deploy][ERROR ] RuntimeError: Failed to execute command: su -c 'rpm --import "https://ceph.com/git/?p=ceph.git;a=bl My ~/.curlrc, /etc/yum.conf and ~/.rpmmacros contain the following line:
proxy=http://10.12.132.208:8080 I tried https too but get the same error
L And of course /etc/wgetrc contains the 2 lines below for http and https proxy:
http_proxy=
http://10.12.132.208:8080 https_proxy=
https://10.12.132.208:8080 Stupid question for JRG: should ~/.curlrc, /etc/yum.conf and ~/.rpmmacros contain http(s)_proxy= and not proxy=?? Thanks again! Narendra Gruher, Joseph R joseph.r.gruher
at intel.com
I don’t think this is true… I am behind a proxy and use ceph-deploy and I do not have to use --no-adjust-repos if I set up all my proxies correctly. From:
ceph-users-bounces at lists.ceph.com [mailto:ceph-users-bounces at lists.ceph.com] On Behalf Of
alistair.whittle at barclays.com Sent: Tuesday, October 29, 2013 12:15 PM To:
ceph-users at lists.ceph.com Subject: Re: ceph-deploy problems on CentOS-6.4 One more thing, because you are using a proxy, you need to include the --no-adjust-repos flag at the end of the install command in Ceph-deploy. I will be honest. I found with my install that doing the yum install outside of Ceph-deploy on the Ceph node itself works much better. It does require all the packages
and dependencies to be available on the node, but it saved me a lot of debugging hassle and time. In fact, I am fast developing the opinion that doing most things outside of Ceph-deploy (certainly on my Red Hat build) is the easier option. __________________________________________________________________________ Alistair Whittle | Storage Engineer | Global Technology Infrastructure and Services Tel +44 (0) 20 3134 5933 | Mobile +44 (0) 77883 55220 | Email
alistair.whittle at barclays.com<mailto:alistair.whittle at barclays.com> Barclays, 10 South Colonnade, Canary Wharf, London, E14 4PU barclays.com Advance Out of Office Notification: 14-18th October (Training) -----Original Message----- From: Gruher, Joseph R [joseph.r.gruher at intel.com<mailto:joseph.r.gruher
at intel.com>] Sent: Tuesday, October 29, 2013 06:48 PM GMT Standard Time To: Trivedi, Narendra; Whittle, Alistair: Investment Bank (LDN);
ceph-users at lists.ceph.com<mailto:ceph-users at lists.ceph.com> Subject: RE: ceph-deploy problems on CentOS-6.4 Now you need to set the Curl proxy in /root/.curlrc (might also set it in ~/.curlrc for good measure). To ceph-deploy on CentOS 6.4 I had to set all these proxies: Curl: /root/.curlrc rpm: /root/.rpmmacros wget: /etc/wgetrc yum: /etc/yum.conf From: Trivedi, Narendra [mailto:Narendra.Trivedi at savvis.com] Sent: Tuesday, October 29, 2013 11:45 AM To:
alistair.whittle at barclays.com<mailto:alistair.whittle at barclays.com>; Gruher, Joseph R;
ceph-users at lists.ceph.com<mailto:ceph-users at lists.ceph.com> Subject: RE: ceph-deploy problems on CentOS-6.4 I made the changes and it seems now it can successfully wget the rpm but getting a different error now: [root at ceph-admin-node-centos-6-4 my-cluster]# ceph-deploy install ceph-node1-mon-centos-6-4 ceph-node2-osd0-centos-6-4
ceph-node3-osd1-centos-6-4 [ceph_deploy.cli][INFO ] Invoked (1.2.7): /usr/bin/ceph-deploy install ceph-node1-mon-centos-6-4 ceph-node2-osd0-centos-6-4 ceph-node3-osd1-centos-6-4 [ceph_deploy.install][DEBUG ] Installing stable version dumpling on cluster ceph hosts ceph-node1-mon-centos-6-4 ceph-node2-osd0-centos-6-4 ceph-node3-osd1-centos-6-4 [ceph_deploy.install][DEBUG ] Detecting platform for host ceph-node1-mon-centos-6-4 ... [ceph_deploy.sudo_pushy][DEBUG ] will use a remote connection without sudo [ceph_deploy.install][INFO ] Distro info: CentOS 6.4 Final [ceph-node1-mon-centos-6-4][INFO ] installing ceph on ceph-node1-mon-centos-6-4 [ceph-node1-mon-centos-6-4][INFO ] adding EPEL repository [ceph-node1-mon-centos-6-4][INFO ] Running command: wget
http://dl.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch.rpm [ceph-node1-mon-centos-6-4][ERROR ] --2013-10-29 13:40:43--
http://dl.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch.rpm [ceph-node1-mon-centos-6-4][ERROR ] Connecting to 10.12.132.208:8080... connected. [ceph-node1-mon-centos-6-4][ERROR ] Proxy request sent, awaiting response... 200 OK [ceph-node1-mon-centos-6-4][ERROR ] Length: 14540 (14K) [application/x-rpm] [ceph-node1-mon-centos-6-4][ERROR ] Saving to: `epel-release-6-8.noarch.rpm' [ceph-node1-mon-centos-6-4][ERROR ] 0K .......... .... 100% 1.52M=0.009s [ceph-node1-mon-centos-6-4][ERROR ] Last-modified header invalid -- time-stamp ignored. [ceph-node1-mon-centos-6-4][ERROR ] 2013-10-29 13:41:42 (1.52 MB/s) - `epel-release-6-8.noarch.rpm' saved [14540/14540] [ceph-node1-mon-centos-6-4][INFO ] Running command: rpm -Uvh --replacepkgs epel-release-6*.rpm [ceph-node1-mon-centos-6-4][INFO ] Preparing... ################################################## [ceph-node1-mon-centos-6-4][INFO ] epel-release ################################################## [ceph-node1-mon-centos-6-4][ERROR ] warning: epel-release-6-8.noarch.rpm: Header V3 RSA/SHA256 Signature, key ID 0608b895: NOKEY [ceph-node1-mon-centos-6-4][INFO ] Running command: su -c 'rpm --import "https://ceph.com/git/?p=ceph.git;a=blob_plain;f=keys/release.asc"' [ceph-node1-mon-centos-6-4][ERROR ] Traceback (most recent call last): [ceph-node1-mon-centos-6-4][ERROR ] File "/usr/lib/python2.6/site-packages/ceph_deploy/hosts/centos/install.py", line 23, in install [ceph-node1-mon-centos-6-4][ERROR ] File "/usr/lib/python2.6/site-packages/ceph_deploy/util/decorators.py", line 10, in inner [ceph-node1-mon-centos-6-4][ERROR ] File "/usr/lib/python2.6/site-packages/ceph_deploy/util/wrappers.py", line 6, in remote_call [ceph-node1-mon-centos-6-4][ERROR ] File "/usr/lib64/python2.6/subprocess.py", line 502, in check_call [ceph-node1-mon-centos-6-4][ERROR ] raise CalledProcessError(retcode, cmd) [ceph-node1-mon-centos-6-4][ERROR ] CalledProcessError: Command '['su -c \'rpm --import "https://ceph.com/git/?p=ceph.git;a=blob_plain;f=keys/release.asc"\'']'
returned non-zero exit status 1 [ceph-node1-mon-centos-6-4][ERROR ] curl: (7) couldn't connect to host [ceph-node1-mon-centos-6-4][ERROR ] error:
https://ceph.com/git/?p=ceph.git;a=blob_plain;f=keys/release.asc: import read failed(2). [ceph_deploy][ERROR ] RuntimeError: Failed to execute command: su -c 'rpm --import "https://ceph.com/git/?p=ceph.git;a=blob_plain;f=keys/release.asc"' Does anyone know why? Thanks a lot in advance! Nar From:alistair.whittle at barclays.com<mailto:alistair.whittle
at barclays.com> [mailto:alistair.whittle at barclays.com] Sent: Tuesday, October 29, 2013 12:08 PM To:
joseph.r.gruher at intel.com<mailto:joseph.r.gruher at intel.com>; Trivedi, Narendra;
ceph-users at lists.ceph.com<mailto:ceph-users at lists.ceph.com> Subject: RE: ceph-deploy problems on CentOS-6.4 You also want to make sure that if you are using a proxy your proxy settings are maintained through sudo. With my deployment I had to add a line to my sudoers file to specify that the https_proxy and http_proxy settings are maintained. Didn’t work otherwise. Defaults env_keep += "http_proxy https_proxy" From:ceph-users-bounces at lists.ceph.com<mailto:ceph-users-bounces
at lists.ceph.com> [mailto:ceph-users-bounces at lists.ceph.com] On Behalf Of Gruher, Joseph R Sent: Tuesday, October 29, 2013 4:55 PM To: Trivedi, Narendra;
ceph-users at lists.ceph.com<mailto:ceph-users at lists.ceph.com> Subject: Re: ceph-deploy problems on CentOS-6.4 If you are behind a proxy try configuring the wget proxy through /etc/wgetrc. I had a similar problem where I could complete wget commands manually but they would fail
in ceph-deploy until I configured the wget proxy in that manner. From:
ceph-users-bounces at lists.ceph.com<mailto:ceph-users-bounces at lists.ceph.com> [mailto:ceph-users-bounces
at lists.ceph.com] On Behalf Of Trivedi, Narendra Sent: Tuesday, October 29, 2013 9:51 AM To:
ceph-users at lists.ceph.com<mailto:ceph-users at lists.ceph.com> Subject: ceph-deploy problems on CentOS-6.4 Hi All, I am a newbie to ceph. I am installing ceph (dumpling release) using ceph-deploy (issued from my admin node) on one monitor and two OSD nodes running CentOS 6.4 (64-bit)
using followed instructions in the link below: http://ceph.com/docs/master/start/quick-ceph-deploy/ My setup looks exactly like the diagram. I followed pre-flight instructions exacty as outlined in the link below: http://ceph.com/docs/master/start/quick-start-preflight/ The ceph-deploy takes forever and then throws up the following error: 2013-10-28 17:32:35,903 [ceph_deploy.cli][INFO ] Invoked (1.2.7): /usr/bin/ceph-deploy new ceph-node1-mon-centos-6-4 2013-10-28 17:32:35,904 [ceph_deploy.new][DEBUG ] Creating new cluster named ceph 2013-10-28 17:32:35,904 [ceph_deploy.new][DEBUG ] Resolving host ceph-node1-mon-centos-6-4 2013-10-28 17:32:35,904 [ceph_deploy.new][DEBUG ] Monitor ceph-node1-mon-centos-6-4 at 10.12.0.70 2013-10-28 17:32:35,904 [ceph_deploy.new][DEBUG ] Monitor initial members are ['ceph-node1-mon-centos-6-4'] 2013-10-28 17:32:35,904 [ceph_deploy.new][DEBUG ] Monitor addrs are ['10.12.0.70'] 2013-10-28 17:32:35,905 [ceph_deploy.new][DEBUG ] Creating a random mon key... 2013-10-28 17:32:35,905 [ceph_deploy.new][DEBUG ] Writing initial config to ceph.conf... 2013-10-28 17:32:35,905 [ceph_deploy.new][DEBUG ] Writing monitor keyring to ceph.mon.keyring... 2013-10-28 17:33:10,287 [ceph_deploy.cli][INFO ] Invoked (1.2.7): /usr/bin/ceph-deploy install ceph-node1-mon-centos-6-4 ceph-node2-osd0-centos-6-4 ceph-admin-node-centos-6-4 2013-10-28 17:33:10,287 [ceph_deploy.install][DEBUG ] Installing stable version dumpling on cluster ceph hosts ceph-node1-mon-centos-6-4 ceph-node2-osd0-centos-6-4 ceph-admin-node-centos-6-4 2013-10-28 17:33:10,288 [ceph_deploy.install][DEBUG ] Detecting platform for host ceph-node1-mon-centos-6-4 ... 2013-10-28 17:33:10,288 [ceph_deploy.sudo_pushy][DEBUG ] will use a remote connection without sudo 2013-10-28 17:33:10,626 [ceph_deploy.install][INFO ] Distro info: CentOS 6.4 Final 2013-10-28 17:33:10,626 [ceph-node1-mon-centos-6-4][INFO ] installing ceph on ceph-node1-mon-centos-6-4 2013-10-28 17:33:10,633 [ceph-node1-mon-centos-6-4][INFO ] adding EPEL repository 2013-10-28 17:33:10,633 [ceph-node1-mon-centos-6-4][INFO ] Running command: wget
http://dl.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch.rpm 2013-10-28 19:20:35,893 [ceph-node1-mon-centos-6-4][ERROR ] Traceback (most recent call last): 2013-10-28 19:20:35,894 [ceph-node1-mon-centos-6-4][ERROR ] File "/usr/lib/python2.6/site-packages/ceph_deploy/hosts/centos/install.py", line 77, in install_epel 2013-10-28 19:20:35,899 [ceph-node1-mon-centos-6-4][ERROR ] File "/usr/lib/python2.6/site-packages/ceph_deploy/util/decorators.py", line 10, in inner 2013-10-28 19:20:35,900 [ceph-node1-mon-centos-6-4][ERROR ] File "/usr/lib/python2.6/site-packages/ceph_deploy/util/wrappers.py", line 6, in remote_call 2013-10-28 19:20:35,902 [ceph-node1-mon-centos-6-4][ERROR ] File "/usr/lib64/python2.6/subprocess.py", line 502, in check_call 2013-10-28 19:20:35,903 [ceph-node1-mon-centos-6-4][ERROR ] raise CalledProcessError(retcode, cmd) 2013-10-28 19:20:35,904 [ceph-node1-mon-centos-6-4][ERROR ] CalledProcessError: Command '['wget', 'http://dl.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch.rpm']'
returned non-zero exit status 4 2013-10-28 19:20:35,123
[ceph-node1-mon-centos-6-4][ERROR ] --2013-10-28 17:33:10--
http://dl.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch.rpm 2013-10-28 19:20:35,123
[ceph-node1-mon-centos-6-4][ERROR ] Resolving dl.fedoraproject.org... 209.132.181.25, 209.132.181.26, 209.132.181.27, ... 2013-10-28 19:20:35,912 [ceph-node1-mon-centos-6-4][ERROR ] Connecting to dl.fedoraproject.org<http://dl.fedoraproject.org/>|209.132.181.25|:80...
failed: Connection timed out. 2013-10-28 19:20:35,912 [ceph-node1-mon-centos-6-4][ERROR ] Connecting to dl.fedoraproject.org<http://dl.fedoraproject.org/>|209.132.181.26|:80...
failed: Connection timed out. Interestingly, “wget
http://dl.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch.rpm” on each nodes (1 mon and 2 OSDs) succeeds without any problem. I have tried everything many times with root user, ceph user etc. but it fails every time! It is very frustrating! Has anyone else experienced the same or similar problem? Thanks a lot in advance! Nar This message contains information which may be confidential and/or privileged. Unless you are the intended recipient (or authorized to receive for the intended recipient),
you may not read, use, copy or disclose to anyone the message or any information contained in the message. If you have received the message in error, please advise the sender by reply e-mail and delete the message and any attachment(s) thereto without retaining
any copies. _______________________________________________ This message is for information purposes only, it is not a recommendation, advice, offer or solicitation to buy or sell a product or service nor an official confirmation
of any transaction. It is directed at persons who are professionals and is not intended for retail customer use. Intended for recipient only. This message is subject to the terms at: www.barclays.com/emaildisclaimer<http://www.barclays.com/emaildisclaimer>. For important disclosures, please see: www.barclays.com/salesandtradingdisclaimer<http://www.barclays.com/salesandtradingdisclaimer>
regarding market commentary from Barclays Sales and/or Trading, who are active market participants; and in respect of Barclays Research, including disclosures relating to specific issuers, please see
http://publicresearch.barclays.com. _______________________________________________ This message contains information which may be confidential and/or privileged. Unless you are the intended recipient (or authorized to receive for the intended recipient),
you may not read, use, copy or disclose to anyone the message or any information contained in the message. If you have received the message in error, please advise the sender by reply e-mail and delete the message and any attachment(s) thereto without retaining
any copies. _______________________________________________ This message is for information purposes only, it is not a recommendation, advice, offer or solicitation to buy or sell a product or service nor an official confirmation
of any transaction. It is directed at persons who are professionals and is not intended for retail customer use. Intended for recipient only. This message is subject to the terms at: www.barclays.com/emaildisclaimer<http://www.barclays.com/emaildisclaimer>. For important disclosures, please see: www.barclays.com/salesandtradingdisclaimer<http://www.barclays.com/salesandtradingdisclaimer>
regarding market commentary from Barclays Sales and/or Trading, who are active market participants; and in respect of Barclays Research, including disclosures relating to specific issuers, please see
http://publicresearch.barclays.com. _______________________________________________ -------------- next part -------------- An HTML attachment was scrubbed...
From: Gruher, Joseph R [mailto:joseph.r.gruher@xxxxxxxxx]
Now you need to set the Curl proxy in /root/.curlrc (might also set it in ~/.curlrc for good measure). To ceph-deploy on CentOS 6.4 I had to set all these proxies: Curl: /root/.curlrc rpm: /root/.rpmmacros wget: /etc/wgetrc yum: /etc/yum.conf From: Trivedi, Narendra [mailto:Narendra.Trivedi@xxxxxxxxxx]
I made the changes and it seems now it can successfully wget the rpm but getting a different error now:
[root@ceph-admin-node-centos-6-4 my-cluster]# ceph-deploy install ceph-node1-mon-centos-6-4 ceph-node2-osd0-centos-6-4 ceph-node3-osd1-centos-6-4 [ceph_deploy.cli][INFO ] Invoked (1.2.7): /usr/bin/ceph-deploy install ceph-node1-mon-centos-6-4 ceph-node2-osd0-centos-6-4
ceph-node3-osd1-centos-6-4 [ceph_deploy.install][DEBUG ] Installing stable version dumpling on cluster ceph hosts ceph-node1-mon-centos-6-4
ceph-node2-osd0-centos-6-4 ceph-node3-osd1-centos-6-4 [ceph_deploy.install][DEBUG ] Detecting platform for host ceph-node1-mon-centos-6-4 ... [ceph_deploy.sudo_pushy][DEBUG ] will use a remote connection without sudo [ceph_deploy.install][INFO ] Distro info: CentOS 6.4 Final [ceph-node1-mon-centos-6-4][INFO ] installing ceph on ceph-node1-mon-centos-6-4 [ceph-node1-mon-centos-6-4][INFO ] adding EPEL repository [ceph-node1-mon-centos-6-4][INFO ] Running command: wget
http://dl.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch.rpm [ceph-node1-mon-centos-6-4][ERROR ] --2013-10-29 13:40:43--
http://dl.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch.rpm [ceph-node1-mon-centos-6-4][ERROR ] Connecting to 10.12.132.208:8080... connected. [ceph-node1-mon-centos-6-4][ERROR ] Proxy request sent, awaiting response... 200 OK [ceph-node1-mon-centos-6-4][ERROR ] Length: 14540 (14K) [application/x-rpm] [ceph-node1-mon-centos-6-4][ERROR ] Saving to: `epel-release-6-8.noarch.rpm' [ceph-node1-mon-centos-6-4][ERROR ] 0K .......... .... 100% 1.52M=0.009s [ceph-node1-mon-centos-6-4][ERROR ] Last-modified header invalid -- time-stamp ignored. [ceph-node1-mon-centos-6-4][ERROR ] 2013-10-29 13:41:42 (1.52 MB/s) - `epel-release-6-8.noarch.rpm' saved [14540/14540] [ceph-node1-mon-centos-6-4][INFO ] Running command: rpm -Uvh --replacepkgs epel-release-6*.rpm [ceph-node1-mon-centos-6-4][INFO ] Preparing... ################################################## [ceph-node1-mon-centos-6-4][INFO ] epel-release ################################################## [ceph-node1-mon-centos-6-4][ERROR ] warning: epel-release-6-8.noarch.rpm: Header V3 RSA/SHA256 Signature, key
ID 0608b895: NOKEY [ceph-node1-mon-centos-6-4][INFO ] Running command: su -c 'rpm --import "https://ceph.com/git/?p=ceph.git;a=blob_plain;f=keys/release.asc"' [ceph-node1-mon-centos-6-4][ERROR ] Traceback (most recent call last): [ceph-node1-mon-centos-6-4][ERROR ] File "/usr/lib/python2.6/site-packages/ceph_deploy/hosts/centos/install.py",
line 23, in install [ceph-node1-mon-centos-6-4][ERROR ] File "/usr/lib/python2.6/site-packages/ceph_deploy/util/decorators.py",
line 10, in inner [ceph-node1-mon-centos-6-4][ERROR ] File "/usr/lib/python2.6/site-packages/ceph_deploy/util/wrappers.py", line
6, in remote_call [ceph-node1-mon-centos-6-4][ERROR ] File "/usr/lib64/python2.6/subprocess.py", line 502, in check_call [ceph-node1-mon-centos-6-4][ERROR ] raise CalledProcessError(retcode, cmd) [ceph-node1-mon-centos-6-4][ERROR ] CalledProcessError: Command '['su -c \'rpm --import "https://ceph.com/git/?p=ceph.git;a=blob_plain;f=keys/release.asc"\'']'
returned non-zero exit status 1 [ceph-node1-mon-centos-6-4][ERROR ] curl: (7) couldn't connect to host [ceph-node1-mon-centos-6-4][ERROR ] error:
https://ceph.com/git/?p=ceph.git;a=blob_plain;f=keys/release.asc:
import read failed(2). [ceph_deploy][ERROR ] RuntimeError: Failed to execute command: su -c 'rpm --import "https://ceph.com/git/?p=ceph.git;a=blob_plain;f=keys/release.asc"'
Does anyone know why? Thanks a lot in advance! Nar From:
alistair.whittle@xxxxxxxxxxxx [mailto:alistair.whittle@xxxxxxxxxxxx]
You also want to make sure that if you are using a proxy your proxy settings are maintained through sudo.
With my deployment I had to add a line to my sudoers file to specify that the https_proxy and http_proxy settings are maintained. Didn’t work otherwise. Defaults env_keep += "http_proxy https_proxy" From:
ceph-users-bounces@xxxxxxxxxxxxxx [mailto:ceph-users-bounces@xxxxxxxxxxxxxx]
On Behalf Of Gruher, Joseph R If you are behind a proxy try configuring the wget proxy through /etc/wgetrc. I had a similar problem where I could complete wget commands manually but they would fail in ceph-deploy until I configured the wget
proxy in that manner. From:
ceph-users-bounces@xxxxxxxxxxxxxx [mailto:ceph-users-bounces@xxxxxxxxxxxxxx]
On Behalf Of Trivedi, Narendra Hi All,
I am a newbie to ceph. I am installing ceph (dumpling release) using ceph-deploy (issued
from my admin node) on one monitor and two OSD nodes running CentOS 6.4 (64-bit) using followed instructions in the link below:
http://ceph.com/docs/master/start/quick-ceph-deploy/
My setup looks exactly like the diagram. I followed pre-flight instructions exacty as outlined in the link below:
http://ceph.com/docs/master/start/quick-start-preflight/
The ceph-deploy takes forever and then throws up the following error:
2013-10-28 17:32:35,903 [ceph_deploy.cli][INFO ] Invoked (1.2.7): /usr/bin/ceph-deploy new ceph-node1-mon-centos-6-4
2013-10-28 17:32:35,904 [ceph_deploy.new][DEBUG ] Creating new cluster named ceph
2013-10-28 17:32:35,904 [ceph_deploy.new][DEBUG ] Resolving host ceph-node1-mon-centos-6-4
2013-10-28 17:32:35,904 [ceph_deploy.new][DEBUG ] Monitor ceph-node1-mon-centos-6-4 at 10.12.0.70
2013-10-28 17:32:35,904 [ceph_deploy.new][DEBUG ] Monitor initial members are ['ceph-node1-mon-centos-6-4']
2013-10-28 17:32:35,904 [ceph_deploy.new][DEBUG ] Monitor addrs are ['10.12.0.70']
2013-10-28 17:32:35,905 [ceph_deploy.new][DEBUG ] Creating a random mon key...
2013-10-28 17:32:35,905 [ceph_deploy.new][DEBUG ] Writing initial config to ceph.conf...
2013-10-28 17:32:35,905 [ceph_deploy.new][DEBUG ] Writing monitor keyring to ceph.mon.keyring...
2013-10-28 17:33:10,287 [ceph_deploy.cli][INFO ] Invoked (1.2.7): /usr/bin/ceph-deploy install ceph-node1-mon-centos-6-4 ceph-node2-osd0-centos-6-4 ceph-admin-node-centos-6-4
2013-10-28 17:33:10,287 [ceph_deploy.install][DEBUG ] Installing stable version dumpling on cluster ceph hosts ceph-node1-mon-centos-6-4 ceph-node2-osd0-centos-6-4 ceph-admin-node-centos-6-4
2013-10-28 17:33:10,288 [ceph_deploy.install][DEBUG ] Detecting platform for host ceph-node1-mon-centos-6-4 ...
2013-10-28 17:33:10,288 [ceph_deploy.sudo_pushy][DEBUG ] will use a remote connection without sudo
2013-10-28 17:33:10,626 [ceph_deploy.install][INFO ] Distro info: CentOS 6.4 Final
2013-10-28 17:33:10,626 [ceph-node1-mon-centos-6-4][INFO ] installing ceph on ceph-node1-mon-centos-6-4
2013-10-28 17:33:10,633 [ceph-node1-mon-centos-6-4][INFO ] adding EPEL repository
2013-10-28 17:33:10,633 [ceph-node1-mon-centos-6-4][INFO ] Running command: wget http://dl.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch.rpm
2013-10-28 19:20:35,893 [ceph-node1-mon-centos-6-4][ERROR ] Traceback (most recent call last):
2013-10-28 19:20:35,894 [ceph-node1-mon-centos-6-4][ERROR ] File "/usr/lib/python2.6/site-packages/ceph_deploy/hosts/centos/install.py", line 77, in install_epel
2013-10-28 19:20:35,899 [ceph-node1-mon-centos-6-4][ERROR ] File "/usr/lib/python2.6/site-packages/ceph_deploy/util/decorators.py", line 10, in inner
2013-10-28 19:20:35,900 [ceph-node1-mon-centos-6-4][ERROR ] File "/usr/lib/python2.6/site-packages/ceph_deploy/util/wrappers.py", line 6, in remote_call
2013-10-28 19:20:35,902 [ceph-node1-mon-centos-6-4][ERROR ] File "/usr/lib64/python2.6/subprocess.py", line 502, in check_call
2013-10-28 19:20:35,903 [ceph-node1-mon-centos-6-4][ERROR ] raise CalledProcessError(retcode, cmd)
2013-10-28 19:20:35,904 [ceph-node1-mon-centos-6-4][ERROR ] CalledProcessError: Command '['wget', 'http://dl.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch.rpm']'
returned non-zero exit status 4
2013-10-28 19:20:35,123 [ceph-node1-mon-centos-6-4][ERROR
] --2013-10-28 17:33:10-- http://dl.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch.rpm
2013-10-28 19:20:35,123 [ceph-node1-mon-centos-6-4][ERROR
] Resolving dl.fedoraproject.org... 209.132.181.25, 209.132.181.26, 209.132.181.27, ...
2013-10-28 19:20:35,912 [ceph-node1-mon-centos-6-4][ERROR ] Connecting to dl.fedoraproject.org|209.132.181.25|:80...
failed: Connection timed out.
2013-10-28 19:20:35,912 [ceph-node1-mon-centos-6-4][ERROR ] Connecting to dl.fedoraproject.org|209.132.181.26|:80...
failed: Connection timed out.
Interestingly, “wget http://dl.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch.rpm” on
each nodes (1 mon and 2 OSDs) succeeds without any problem. I have tried everything many times with root user, ceph user etc. but it fails every time! It is very frustrating!
Has anyone else experienced the same or similar problem?
Thanks a lot in advance! Nar
_______________________________________________ This message is for information purposes only, it is not a recommendation, advice, offer or solicitation to buy or sell a product or service nor an official confirmation of any transaction. It is directed at persons who are professionals
and is not intended for retail customer use. Intended for recipient only. This message is subject to the terms at:
www.barclays.com/emaildisclaimer. For important disclosures, please see: www.barclays.com/salesandtradingdisclaimer
regarding market commentary from Barclays Sales and/or Trading, who are active market participants; and in respect of Barclays Research, including disclosures relating to specific issuers, please see
http://publicresearch.barclays.com. _______________________________________________
|
_______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
