Hi,
well that was way easier than expected.
Thanks a lot :)
On 10/23/2013 04:57 PM, Loic Dachary wrote:
Hi,
Why not just add cluster network and public network to the global section ( http://ceph.com/docs/master/rados/configuration/network-config-ref/#ceph-networks ) ? The OSDs will pick their address when restarted. I did it once ( just once ;-) and it worked.
My 2cts
On 23/10/2013 16:33, Stefan Schwarz wrote:
Hello to all,
I installed a ceph cluster using ceph-deploy and i am quite happy.
Now i want to add a cluster network to it. According to "ceph report" public_addr and cluster_addr are set to the same ip. How can i change this now?
Is it save to add something like this to my ceph.conf:
#( for 1 to 11 )
[osd.1]
host = ceph-s01
cluster addr = 10.0.0.1
public addr = 192.168.55.1
#( for 11 to 23 )
[osd.11]
host = ceph-s02
cluster addr = 10.0.0.2
public addr = 192.168.55.2
I'm a bit scared about crashing my existing osds and loosing all my data.
Thanks for your help
Stefan
_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
--
Loïc Dachary, Artisan Logiciel Libre
All that is necessary for the triumph of evil is that good people do nothing.
_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
