Wido, Thanks! I tried again with your command syntax but the result is the same.
[root@xen02 ~]# virsh secret-set-value $(cat uuid) $(cat client.admin.key)
Secret value set
[root@xen02 ~]# xe sr-create type=libvirt name-label=ceph device-config:xml-filename=ceph.xml
Error code: libvirt
Error parameters: libvirt: VIR_ERR_65: VIR_FROM_30: Invalid secret: virSecretFree
[root@xen02 ~]# virsh pool-create ceph.xml
error: Failed to create pool from ceph.xml
error: Invalid secret: virSecretFree
[root@xen02 ~]#
On Thu, Jul 11, 2013 at 1:14 PM, Wido den Hollander <wido@xxxxxxxx> wrote:
Hi.
So, the problem here is a couple of things.
First: libvirt doesn't handle RBD storage pools without auth. That's my bad, but I never resolved that bug: http://tracker.ceph.com/issues/3493
For now, make sure cephx is enabled.
Also, the commands you are using don't seem to be right.
It should be:
$ virsh secret-set-value $(cat uuid) <base64 secret key>
Could you try again with cephx enabled and setting the secret value like mentioned above?
Wido
On 07/11/2013 06:00 PM, John Shen wrote:
Hi Dave, Thank you so much for getting back to me.
the command returns the same errors:
[root@xen02 ~]# virsh pool-create ceph.xml
error: Failed to create pool from ceph.xml
error: Invalid secret: virSecretFree
[root@xen02 ~]#
the secret was precreated for the user admin that I use elsewhere with
no issues (rbd mount, cephfs etc.), and per the ceph documentation, i
just set the secret value with this command
virsh secret-set-value $(cat uuid) --base64 $(cat client.admin.key)
where the key is obtained from
ceph auth list
and uuid is generated by
virsh secret-define --file secret.xml
# cat secret.xml
<secret ephemeral='no' private='no'>
<usage type='ceph'>
<name>client.admin $(cat client.admin.key)</name>
</usage>
</secret>
On Thu, Jul 11, 2013 at 7:22 AM, Dave Scott <Dave.Scott@xxxxxxxxxxxxx_______________________________________________<mailto:Dave.Scott@eu.citrix.com>> wrote:
[sorry I didn't manage to reply to the original message; I only just
joined this list.
Sorry if this breaks your threading!]
On 10 Jul 2013 at 16:01 John Shen wrote:
> I was following the tech preview of libvirt/ceph integration in
xenserver, but ran
> into an issue with ceph auth in setting up the SR. any help would
be greatly
> appreciated.
I must confess that I've disabled auth in my test environment.
Clearly I should
go back and enable it again :-)
> uuid was generated per: http://eu.ceph.com/docs/wip-dump/rbd/libvirt/
>
> according to inktank, storage pool auth syntax differs slightly
from block device
> attachment. I tried both format but got the same error.
>
> Ref:
>
>
http://xenserver.org/blog/entry/tech-preview-of-xenserver-libvirt-ceph.html
>
> [root <at> xen01 ~]# xe sr-create type=libvirt name-label=ceph
device-config:xml-filename=ceph.xml
> Error code: libvirt
> Error parameters: libvirt: VIR_ERR_65: VIR_FROM_30: Invalid
secret: virSecretFree
The "xe sr-create" call is handled by "xapi" which calls
"xapi-libvirt-storage" which
uses the libvirt API directly to create the pool. It _should_ do the
same as running
virsh pool-create ceph.xml
Could you try the "virsh pool-create" and see if that works? If it
does, then we need
to figure out what the "virsh" CLI is doing that my Pool.create
function call isn't. If
it doesn't then there might be some other missing step. Did you have
to pre-create
a secret (is that "virsh secret-create"?)
Cheers,
Dave Scott
--
--John Shen
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
--
Wido den Hollander
42on B.V.
Phone: +31 (0)20 700 9902
Skype: contact42on
_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
--John Shen
_______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
