What kernel version are you using on your client? On Tue, Mar 5, 2013 at 4:48 PM, tra26 <tra26@xxxxxxxxxxxxx> wrote: > Hello, > > I've been working to deploy ceph recently and have been conducting some > performance tests and have ran into some problems. I've created an rbd > image, mapped it on a client and put a file system on it. I've tried with > both ext4 and xfs to which the same results occur. After a while the system > running bonnie will lock up leaving some kernel messages on the console and > requires a hard reset. This has occurred on two different machines, one was > a monitor and the other was a plain client. > > > My setup: 5 osds and 3 monitors (2 monitors are on osd machines). Replica is > set to 3 on the pool that my image is stored and the cluster was healthy at > the start. I am using the 0.56 packages for ubuntu. > > Any ideas on what is causing the system to lockup/panic? > > Thanks, > > -Trevor Adams > _______________________________________________ > ceph-users mailing list > ceph-users@xxxxxxxxxxxxxx > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com -- ______________________________ Dino Yancey 2GNT.com Admin _______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
 |