After using the filestore of one osd to initialize another so as to speed things up, adjusting the osd number in the superblock, I found out the monitor will silently reject osds that don't have the expected id: they seem to be just taking long to complete the boot, but nothing is logged to the monitor logs or in ceph -w output by default. That's a problem in itself, which IMHO justifies making the rejection more verbose. Anyway, even after modfying the superblock so that, instead of the original osd's fsid, it had the fsid in the OSD's filesystem, it *still* wouldn't boot up. Only after writing this patch did I realize that there was a mismatch between the fsid file in the osd filesystem and the fsid expected by the monitors, but that had never been a problem as long as the superblock had the expected fsid. (Presumably I restored the fsid from backups whereas the root of the osd filestore was created from scratch, and the fsid is never consulted when there is a superblock available. I didn't tackle this issue, if it is one.) What this patch does is to enable an osd to register with the monitors after changing its fsid, but only when an option to that effect is enabled. It remains disabled by default. Signed-off-by: Alexandre Oliva <oliva@xxxxxxx> --- src/common/config_opts.h | 1 + src/mon/OSDMonitor.cc | 14 +++++++++----- 2 files changed, 10 insertions(+), 5 deletions(-) diff --git a/src/common/config_opts.h b/src/common/config_opts.h index 9baa356..6698362 100644 --- a/src/common/config_opts.h +++ b/src/common/config_opts.h @@ -169,6 +169,7 @@ OPTION(mon_pg_warn_max_object_skew, OPT_FLOAT, 10.0) // max skew few average in OPTION(mon_pg_warn_min_objects, OPT_INT, 10000) // do not warn below this object # OPTION(mon_pg_warn_min_pool_objects, OPT_INT, 1000) // do not warn on pools below this object # OPTION(mon_cache_target_full_warn_ratio, OPT_FLOAT, .66) // position between pool cache_target_full and max where we start warning +OPTION(mon_osd_allow_fsid_change, OPT_BOOL, false) // allow osds to change fsid OPTION(mon_osd_full_ratio, OPT_FLOAT, .95) // what % full makes an OSD "full" OPTION(mon_osd_nearfull_ratio, OPT_FLOAT, .85) // what % full makes an OSD near full OPTION(mon_globalid_prealloc, OPT_INT, 100) // how many globalids to prealloc diff --git a/src/mon/OSDMonitor.cc b/src/mon/OSDMonitor.cc index dd027b2..8662add 100644 --- a/src/mon/OSDMonitor.cc +++ b/src/mon/OSDMonitor.cc @@ -786,7 +786,8 @@ bool OSDMonitor::check_source(PaxosServiceMessage *m, uuid_d fsid) { if (fsid != mon->monmap->fsid) { dout(0) << "check_source: on fsid " << fsid << " != " << mon->monmap->fsid << dendl; - return true; + if (!g_conf->mon_osd_allow_fsid_change) + return true; } return false; } @@ -1200,11 +1201,12 @@ bool OSDMonitor::preprocess_boot(MOSDBoot *m) if (osdmap.exists(from) && !osdmap.get_uuid(from).is_zero() && osdmap.get_uuid(from) != m->sb.osd_fsid) { - dout(7) << __func__ << " from " << m->get_orig_source_inst() + dout(0) << __func__ << " from " << m->get_orig_source_inst() << " clashes with existing osd: different fsid" << " (ours: " << osdmap.get_uuid(from) << " ; theirs: " << m->sb.osd_fsid << ")" << dendl; - goto ignore; + if (!g_conf->mon_osd_allow_fsid_change) + goto ignore; } if (osdmap.exists(from) && @@ -1256,7 +1258,8 @@ bool OSDMonitor::prepare_boot(MOSDBoot *m) dout(7) << "prepare_boot was up, first marking down " << osdmap.get_inst(from) << dendl; // preprocess should have caught these; if not, assert. assert(osdmap.get_inst(from) != m->get_orig_source_inst()); - assert(osdmap.get_uuid(from) == m->sb.osd_fsid); + assert(osdmap.get_uuid(from) == m->sb.osd_fsid + || g_conf->mon_osd_allow_fsid_change); if (pending_inc.new_state.count(from) == 0 || (pending_inc.new_state[from] & CEPH_OSD_UP) == 0) { @@ -1297,7 +1300,8 @@ bool OSDMonitor::prepare_boot(MOSDBoot *m) dout(10) << " setting osd." << from << " uuid to " << m->sb.osd_fsid << dendl; if (!osdmap.exists(from) || osdmap.get_uuid(from) != m->sb.osd_fsid) { // preprocess should have caught this; if not, assert. - assert(!osdmap.exists(from) || osdmap.get_uuid(from).is_zero()); + assert(!osdmap.exists(from) || osdmap.get_uuid(from).is_zero() + || g_conf->mon_osd_allow_fsid_change); pending_inc.new_uuid[from] = m->sb.osd_fsid; } -- Alexandre Oliva, freedom fighter http://FSFLA.org/~lxoliva/ You must be the change you wish to see in the world. -- Gandhi Be Free! -- http://FSFLA.org/ FSF Latin America board member Free Software Evangelist|Red Hat Brasil GNU Toolchain Engineer -- To unsubscribe from this list: send the line "unsubscribe ceph-devel" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html