On Tue, Jul 03, 2012 at 10:07:16AM +0200, Wido den Hollander wrote: > > > On 03-07-12 09:42, Madhusudhana U wrote: > >Hi all, > >I am trying to increase the throughput in the cluster by enabling > >LACP on both in clients and all ceph cluster nodes. Each client and > >ceph nodes has two 1G Ethernet interface which I want to aggregate > >and make it 2G. LACP has been configured at switch side too. But even after > >the configuration, I am not seeing any through put increase in ceph tell osd > >bench command and also dd. They are taking the same amount as earlier. I am > >constantly seeing around 100MB/sec throughput in both DD and ceph bench > >commands. Can someone suggest me how i can increase the throughput of the > >cluster ? Below are my configurations. > > Can you verify if both NIC's are actually doing something? Use > bwm-ng for example? > > Wido > I would imagine they aren't, as the output hash function for 802.3ad trunking is based on source and destination address, so if your test just writes from a single client to a single OSD, it will just use one link. Neil > > > > No of OSD's : 5 > > No of MON's : 3 > > No of MDS's : 2 > > Linux Kernel : 3.4.4 > > Ceph version : 0.47.3 > > Hard disks : 2x160G SAS drives (raid 0 configuration) > > CPU : Intel(R) Xeon(R) Quad CPU E5506 @ 2.13GHz > > Memory : 6G > > > >Thanks > >__M > > > >-- > >To unsubscribe from this list: send the line "unsubscribe ceph-devel" in > >the body of a message to majordomo@xxxxxxxxxxxxxxx > >More majordomo info at http://vger.kernel.org/majordomo-info.html > > > > -- > To unsubscribe from this list: send the line "unsubscribe ceph-devel" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe ceph-devel" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
