;
; Sample ceph ceph.conf file.
;
; This file defines cluster membership, the various locations
; that Ceph stores data, and any other runtime options.
; If a 'host' is defined for a daemon, the start/stop script will
; verify that it matches the hostname (or else ignore it). If it is
; not defined, it is assumed that the daemon is intended to start on
; the current host (e.g., in a setup with a startup.conf on each
; node).
; global
[global]
; enable secure authentication
auth supported = cephx
keyring = /use/local/etc/ceph/keyring.bin
; allow ourselves to open a lot of files
max open files = 131072
; set up logging
"/usr/local/etc/ceph/ceph.conf" 98L, 2601C
;
; Sample ceph ceph.conf file.
;
; This file defines cluster membership, the various locations
; that Ceph stores data, and any other runtime options.
; If a 'host' is defined for a daemon, the start/stop script will
; verify that it matches the hostname (or else ignore it). If it is
; not defined, it is assumed that the daemon is intended to start on
; the current host (e.g., in a setup with a startup.conf on each
; node).
; global
[global]
; enable secure authentication
auth supported = cephx
keyring = /use/local/etc/ceph/keyring.bin
; allow ourselves to open a lot of files
max open files = 131072
; set up logging
log file = /var/log/ceph/$name.log
; set up pid files
pid file = /var/run/ceph/$name.pid
; monitors
; You need at least one. You need at least three if you want to
; tolerate any node failures. Always create an odd number.
[mon]
mon data = /data/mon$id
; logging, for debugging monitor crashes, in order of
; their likelihood of being helpful :)
;debug ms = 1
;debug mon = 20
;debug paxos = 20
;debug auth = 20
[mon.0]
host = ceph_mon0
mon addr = 192.168.0.211:6789
; mds
; You need at least one. Define two to get a standby.
[mds]
; where the mds keeps it's secret encryption keys
keyring = /usr/local/etc/ceph/keyring.$name
; mds logging to debug issues.
;debug ms = 1
;debug mds = 20
[mds.alpha]
host = ceph_mds0
; osd
; You need at least one. Two if you want data to be replicated.
; Define as many as you like.
[osd]
; This is where the btrfs volume will be mounted.
osd data = /data/osd$id
keyring = /usr/local/etc/ceph/keyring.$name
; Ideally, make this a separate disk or partition. A few
; hundred MB should be enough; more if you have fast or many
; disks. You can use a file under the osd data dir if need be
; (e.g. /data/osd$id/journal), but it will be slower than a
; separate disk or partition.
; This is an example of a file-based journal.
osd journal = /data/osd$id/journal
osd journal size = 1000 ; journal size, in megabytes
; osd logging to debug osd issues, in order of likelihood of being
; helpful
;debug ms = 1
;debug osd = 20
;debug filestore = 20
;debug journal = 20
[osd.0]
host = ceph_osd0
; if 'btrfs devs' is not specified, you're responsible for
; setting up the 'osd data' dir. if it is not btrfs, things
; will behave up until you try to recover from a crash (which
; usually fine for basic testing).
btrfs devs = /dev/sda7
[osd.1]
host = ceph_osd1
btrfs devs = /dev/sda7
log:
[root@ceph_mon0 ~]# ceph mon stat -c /usr/local/etc/ceph/ceph.conf
2011-05-23 11:44:47.078662 7fb266bf8720 unable to authenticate as client.admin
2011-05-23 11:44:47.079037 7fb266bf8720 ceph_tool_common_init failed.
[root@ceph_mds0 ~]# tail /var/log/ceph/mds.alpha.log -f
2011-05-23 23:44:53.464262 7fb0ce956710 -- 192.168.0.207:6800/29302 >>
192.168.0.211:6789/0 pipe(0x26c1a00 sd=5 pgs=0 cs=0 l=0).fault first
fault
2011-05-23 23:44:56.464402 7fb0ce855710 -- 192.168.0.207:6800/29302 >>
192.168.0.211:6789/0 pipe(0x26d3280 sd=5 pgs=0 cs=0 l=0).fault first
fault
2011-05-23 23:44:59.464492 7fb0ce956710 -- 192.168.0.207:6800/29302 >>
192.168.0.211:6789/0 pipe(0x26c3c80 sd=5 pgs=0 cs=0 l=0).fault first
fault
2011-05-23 23:45:02.464787 7fb0ce855710 -- 192.168.0.207:6800/29302 >>
192.168.0.211:6789/0 pipe(0x26cec80 sd=6 pgs=0 cs=0 l=0).fault first
fault
2011-05-23 23:45:05.464941 7fb0cfd58710 mds-1.0 ms_handle_connect on
192.168.0.211:6789/0
2011-05-23 23:45:05.465405 7fb0cfd58710 cannot convert AES key for NSS: -8023
2011-05-23 23:45:05.465946 7fb0cfd58710 cannot convert AES key for NSS: -8023
2011-05-23 23:45:05.465969 7fb0cfd58710 error from decrypt -22
2011-05-23 23:45:05.465998 7fb0cfd58710 cephx:
verify_service_ticket_reply failed decode_decrypt with secret
AQB4R9pNEJ/lFRAAdsRa+EFMA00acC28x9Fj7A==
2011-05-23 23:45:05.466010 7fb0cfd58710 cephx client: could not verify
service_ticket reply
[root@ceph_osd0 ~]# tail /var/log/ceph/osd.0.log -f
2011-05-23 23:43:45.583183 7f5b2f383710 -- 192.168.0.208:6800/30745 >>
192.168.0.211:6789/0 pipe(0xf79280 sd=12 pgs=0 cs=0 l=0).fault first
fault
2011-05-23 23:43:48.583357 7f5b32689710 -- 192.168.0.208:6800/30745 >>
192.168.0.211:6789/0 pipe(0xf79000 sd=12 pgs=0 cs=0 l=0).fault first
fault
2011-05-23 23:43:51.583412 7f5b2f383710 -- 192.168.0.208:6800/30745 >>
192.168.0.211:6789/0 pipe(0xf79280 sd=13 pgs=0 cs=0 l=0).fault first
fault
2011-05-23 23:43:54.583548 7f5b32689710 -- 192.168.0.208:6800/30745 >>
192.168.0.211:6789/0 pipe(0xf79000 sd=12 pgs=0 cs=0 l=0).fault first
fault
2011-05-23 23:43:57.583842 7f5b2f383710 -- 192.168.0.208:6800/30745 >>
192.168.0.211:6789/0 pipe(0xf79280 sd=12 pgs=0 cs=0 l=0).fault first
fault
2011-05-23 23:44:00.584629 7f5b34f8e710 cannot convert AES key for NSS: -8023
2011-05-23 23:44:00.585262 7f5b34f8e710 cannot convert AES key for NSS: -8023
2011-05-23 23:44:00.585290 7f5b34f8e710 error from decrypt -22
2011-05-23 23:44:00.585312 7f5b34f8e710 cephx:
verify_service_ticket_reply failed decode_decrypt with secret
AQAqR9pNUNJ2IBAAp16KszdsZHCwEf5IOcoSdw==
2011-05-23 23:44:00.585322 7f5b34f8e710 cephx client: could not verify
service_ticket reply
Do we have such problems? If you give me some help,
thank you！
--
To unsubscribe from this list: send the line "unsubscribe ceph-devel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
