Well, I tried all these:
1) ./configure #(with desired environment settings)
2) ./autogen.sh
Â2.5) make clean
3) make -j 14
1) ./configure #(with desired environment settings)
2) ./autogen.sh
Â2.5) make clean
2.6ïmake uninstall
3) make -j 14
1) ./autogen.sh
2) ./configure #(with desired environment settings)
Â2.5) make clean
2.6ïmake uninstall
3) make -j 14
0.5)tar zxvf ceph-0.27.1.tar.gz
1) ./configure #(with desired environment settings)
2) ./autogen.sh
Â2.6ïmake uninstall
3) make -j 14
The result is all the same:
============================================================================
Breakpoint 1, ceph_write (fd=10, buf=0x7fff76bf0120 "", size=2097152,
offset=0) at libceph.cc:322
322 return client->write(fd, buf, size, offset);
(gdb)
(gdb) c
Continuing.
Breakpoint 3, 0x00007fa7a61f8c32 in ?? () from /usr/local/lib/libceph.so.1
^^^^^
(gdb) info b
Num Type Disp Enb Address What
1 breakpoint keep y 0x00007fa7a61ca20f in ceph_write at
libceph.cc:322
breakpoint already hit 1 time
2 breakpoint keep y 0x00007fa7a61ca20f in ceph_write at
libceph.cc:321
breakpoint already hit 1 time
3 breakpoint keep y 0x00007fa7a61f8c32 client/Client.cc:4999
breakpoint already hit 1 time
(gdb)
============================================================================
Seem like no symbol for client/Client.cc.... Hmm, what do you think?
Makefile attached. FYI
2011/5/17 Sage Weil <sage@xxxxxxxxxxxx>:
> On Mon, 16 May 2011, Gregory Farnum wrote:
>> Did you actually re-build the code? Configure just sets up some of the scripts:
>> 1) ./configure #(with desired environment settings)
>> 2) ./autogen.sh
>
> Â2.5) make clean
>
>> 3) make #(hopefully -j8 or something)
>
> sage
>
>
>
>>
>> Then you'll need to make sure that the built library is the one you're
>> linking with -- how to do this varies a bit depending on your
>> environment but probably the easiest way to do it is to run "make
>> install".
>> -Greg
>>
>> On Mon, May 16, 2011 at 5:45 AM, Simon Tian <aixt2006@xxxxxxxxx> wrote:
>> > Hi,
>> >
>> > I tried Â( Â Â Â ÂCFLAGS="-march=x86_64 -pipe -ggdb"
>> > CXXFLAGS="${CFLAGS}" Â Â Â ), Âbut error comes:
>> > ======================================================
>> > root@xxxxxxxxxxxxxxxxxxxxxxxxxxxx # ./configure
>> > checking build system type... x86_64-unknown-linux-gnu
>> > checking host system type... x86_64-unknown-linux-gnu
>> > checking target system type... x86_64-unknown-linux-gnu
>> > checking for a BSD-compatible install... /usr/bin/install -c
>> > checking whether build environment is sane... yes
>> > checking for a thread-safe mkdir -p... /bin/mkdir -p
>> > checking for gawk... gawk
>> > checking whether make sets $(MAKE)... yes
>> > checking for style of include used by make... GNU
>> > checking for gcc... gcc
>> > checking for C compiler default output file name...
>> > configure: error: C compiler cannot create executables
>> > See `config.log' for more details.
>> > =======================================================
>> >
>> > So I tried ( Â Â Â ÂCFLAGS="-pipe -ggdb" CXXFLAGS="${CFLAGS}" Â Â Â ),
>> > Âall the FLAGS in the Makefile was set to "-pipe -ggdb", Âas the
>> > attachment showed..
>> >
>> > Hmm, but there was still "??" in the back trace:
>> >
>> > (gdb) bt
>> > #0 Â0x00007fd007491c32 in ?? () from /usr/local/lib/libceph.so.1
>> > #1 Â0x00007fd00746322d in ceph_write (fd=10, buf=0x7fff4ffe2210 "",
>> > size=2097152, offset=0) at libceph.cc:322
>> > #2 Â0x0000000000400fd3 in main (argc=1, argv=0x7fff501e23d8) at testceph.cc:72
>> >
>> >
>> >
>> >
>> >
>> > There is a exception when running my application with libceph, so I
>> > need the stack in the libceph to point the problem. It's a little
>> > URGENT...But I don't know what happened in the libceph, so
>> > unlucky.....Here is my stack:
>> > ===================================================================================
>> > (gdb) c
>> > Continuing.
>> >
>> > Program received signal SIGABRT, Aborted.
>> > [Switching to Thread 0x40838940 (LWP 9118)]
>> > 0x000000312b630265 in raise () from /lib64/libc.so.6
>> > (gdb) bt
>> > #0 Â0x000000312b630265 in raise () from /lib64/libc.so.6
>> > #1 Â0x000000312b631d10 in abort () from /lib64/libc.so.6
>> > #2 Â0x000000312debec44 in __gnu_cxx::__verbose_terminate_handler ()
>> > from /usr/lib64/libstdc++.so.6
>> > #3 Â0x000000312debcdb6 in ?? () from /usr/lib64/libstdc++.so.6
>> > #4 Â0x000000312debcde3 in std::terminate () from /usr/lib64/libstdc++.so.6
>> > #5 Â0x000000312debceca in __cxa_throw () from /usr/lib64/libstdc++.so.6
>> > #6 Â0x00007fdb4cce7a78 in ?? () from /usr/local/lib/libceph.so.1
>> > #7 Â0x00007fdb4cbb4e1c in Mutex::Lock (this=0x66d790,
>> > no_lockdep=false) at ./common/Mutex.h:118
>> > #8 Â0x00007fdb4cbcf5f4 in ?? () from /usr/local/lib/libceph.so.1
>> > #9 Â0x00007fdb4cc45304 in ?? () from /usr/local/lib/libceph.so.1
>> > #10 0x00007fdb4cd2b1d5 in ?? () from /usr/local/lib/libceph.so.1
>> > #11 0x00007fdb4cbec038 in ?? () from /usr/local/lib/libceph.so.1
>> > #12 0x00007fdb4cc6101d in ?? () from /usr/local/lib/libceph.so.1
>> > #13 0x00007fdb4cc4862b in ?? () from /usr/local/lib/libceph.so.1
>> > #14 0x00007fdb4cbb8641 in ?? () from /usr/local/lib/libceph.so.1
>> > #15 0x00007fdb4cbf0a28 in ?? () from /usr/local/lib/libceph.so.1
>> > #16 0x000000312be064a7 in start_thread () from /lib64/libpthread.so.0
>> > #17 0x000000312b6d3c2d in clone () from /lib64/libc.so.6
>> > (gdb)
>> > ===================================================================================
>> >
>> >
>> > Thx!
>> > Simon
>> >
>> >
>> > 2011/5/15 Dyweni - Ceph-Devel <YS3fpFE2ykfB@xxxxxxxxxx>:
>> >> Hi Simon!
>> >>
>> >> Set your CFLAGS and CXXFLAGS environment variables before calling configure
>> >> and make.
>> >>
>> >> Example:
>> >> CFLAGS="-march=native -pipe -ggdb" CXXFLAGS="${CFLAGS}" ./configure
>> >> CFLAGS="-march=native -pipe -ggdb" CXXFLAGS="${CFLAGS}" make
>> >> etc
>> >>
>> >>
>> >> Thanks,
>> >> Dyweni
>> >>
>> >>
>> >> On Sun, 15 May 2011 20:37:16 +0800, Simon Tian wrote:
>> >>
>> >>> Hi Dyweni,
>> >>>
>> >>> Can I do this by any options of "./configure"? or JUST modify
>> >>> the Makefile manually?
>> >>>
>> >>> Thx!
>> >>> Simon
>> >>>
>> >>
>> >>
>> >
>> --
>> To unsubscribe from this list: send the line "unsubscribe ceph-devel" in
>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>> More majordomo info at Âhttp://vger.kernel.org/majordomo-info.html
>>
>>
Attachment:
Makefile
Description: Binary data
