I was on the same node as osd0 ,but still it did not work. When i see /etc/init.d/ceph file,it is not even going into that start case On Tue, Mar 1, 2011 at 11:04 PM, Colin McCabe <cmccabe@xxxxxxxxxxxxxx> wrote: > Hi Upendra, > > You should be on the same node as osd0 in order to start osd0. > > There is that wacky -a option, at least until we decide to remove it. > But my advice is not to use that. Set up something like dsh. > > cheers, > Colin > > > On Tue, Mar 1, 2011 at 3:55 AM, Upendra Moturi <upendra.m@xxxxxxxxxxxx> wrote: >> Hi Colin >> >> Creating /var/run/ceph directory on every node has made it >> working.(/etc/init.d/ceph -a stop) >> But /etc/init.d/ceph start osd0 still does not work >> >> /etc/init.d/ceph -v start osd0 >> Gives output as >> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 0 -t osd "auto start" "" >> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 0 -t osd "user" "" >> >> I have tried this on same node where osd0 is present >> >> Had a look at /etc/init.d/ceph and it does not enter the case start. >> >> >> On Mon, Feb 28, 2011 at 10:27 PM, Colin McCabe <cmccabe@xxxxxxxxxxxxxx> wrote: >>> On Mon, Feb 28, 2011 at 4:00 AM, Upendra Moturi <upendra.m@xxxxxxxxxxxx> wrote: >>>> Hi Colin >>>> >>>> /var/run/ceph exist on only one node(the node on which i start the >>>> cluster with -a) >>> >>> Without /var/run/ceph/pid, the init script will not know which pid to >>> kill. So it will do nothing. >>> >>> Try creating /var/run/ceph and other appropriate directories on all >>> nodes before starting the cluster. >>> >>> Colin >>> >>> >>>> >>>> On Sat, Feb 26, 2011 at 5:58 AM, Colin McCabe <cmccabe@xxxxxxxxxxxxxx> wrote: >>>>> Hi Upendra, >>>>> >>>>> Based on the output you posted, init-ceph is doing something on every >>>>> node. However, I only see a kill for certain nodes. >>>>> >>>>> Does /var/run/ceph/ exist on all nodes, or just some of them? Does the >>>>> appropriate pid file exist on all nodes? What happens when you ssh in >>>>> to those nodes manually and run init-ceph stop? >>>>> >>>>> Colin >>>>> >>>>> >>>>> On Fri, Feb 18, 2011 at 6:11 AM, Upendra Moturi <upendra.m@xxxxxxxxxxxx> wrote: >>>>>> Hi Colin >>>>>> >>>>>> I am using the ubuntu 11.04 (32 bit) and got the ceph package from apt-get >>>>>> i am using the default init script.(Found at /etc/init.d/ceph) >>>>>> >>>>>> Regarding issue 1) >>>>>> >>>>>> On the osd node I tried to start that osd but it did not work >>>>>> Steps followed >>>>>> >>>>>> 1) Started 3 nodes(ceph.conf is same as i sent earlier) >>>>>> >>>>>> 2) mkcephfs -c /etc/ceph/ceph.conf -a --mkbtrfs -k /etc/ceph/keyring.bin >>>>>> >>>>>> 3)/etc/init.d/ceph start osd0 (Did this on first osd) >>>>>> >>>>>> 4) ps -ef | grep ceph or ps -ef | grep cosd ---- does not show any process >>>>>> >>>>>> 5)/etc/init.d/ceph -a start ---- shows all process on all nodes >>>>>> >>>>>> Regading Issue 2 >>>>>> It says -x option is not available >>>>>> >>>>>> Tried /etc/init.d/ceph -ax stop and /etc/init.d/ceph -x stop and even >>>>>> tried /etc/init.d/ceph -x -a stop >>>>>> but nothing worked. >>>>>> >>>>>> Then tried with /etc/init.d/ceph -a -v stop this also did not stop >>>>>> ceph on all nodes but got the output as >>>>>> >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 0 -t mon "auto start" "" >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 0 -t mon "user" "" >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 0 -t mon "ssh path" "/etc/ceph" >>>>>> === mon.0 === >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 0 -t mon "pid file" >>>>>> "/var/run/ceph/mon.0.pid" >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 0 -t mon "log dir" "/var/log/ceph" >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 0 -t mon "log sym dir" "" >>>>>> --- ssh ceph0 "cd /etc/ceph ; ulimit -c unlimited ; mkdir -p /var/log/ceph" >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 0 -t mon "lock file" >>>>>> "/var/lock/subsys/ceph" >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 0 -t mon "pre stop command" "" >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 0 -t mon "post stop command" "" >>>>>> Stopping Ceph mon.0 on ceph0...--- ssh ceph0 "cd /etc/ceph ; ulimit >>>>>> -c unlimited ; while [ 1 ]; do >>>>>> [ -e /var/run/ceph/mon.0.pid ] || break >>>>>> pid=`cat /var/run/ceph/mon.0.pid` >>>>>> while [ -e /proc/$pid ] && grep -q cmon /proc/$pid/cmdline ; do >>>>>> cmd="kill $pid" >>>>>> echo -n $cmd... >>>>>> $cmd >>>>>> sleep 1 >>>>>> continue >>>>>> done >>>>>> break >>>>>> done" >>>>>> kill 1668...done >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 1 -t mon "auto start" "" >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 1 -t mon "user" "" >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 1 -t mon "ssh path" "/etc/ceph" >>>>>> === mon.1 === >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 1 -t mon "pid file" >>>>>> "/var/run/ceph/mon.1.pid" >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 1 -t mon "log dir" "/var/log/ceph" >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 1 -t mon "log sym dir" "" >>>>>> --- ssh ceph1 "cd /etc/ceph ; ulimit -c unlimited ; mkdir -p /var/log/ceph" >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 1 -t mon "lock file" >>>>>> "/var/lock/subsys/ceph" >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 1 -t mon "pre stop command" "" >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 1 -t mon "post stop command" "" >>>>>> Stopping Ceph mon.1 on ceph1...--- ssh ceph1 "cd /etc/ceph ; ulimit >>>>>> -c unlimited ; while [ 1 ]; do >>>>>> [ -e /var/run/ceph/mon.1.pid ] || break >>>>>> pid=`cat /var/run/ceph/mon.1.pid` >>>>>> while [ -e /proc/$pid ] && grep -q cmon /proc/$pid/cmdline ; do >>>>>> cmd="kill $pid" >>>>>> echo -n $cmd... >>>>>> $cmd >>>>>> sleep 1 >>>>>> continue >>>>>> done >>>>>> break >>>>>> done" >>>>>> done >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 2 -t mon "auto start" "" >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 2 -t mon "user" "" >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 2 -t mon "ssh path" "/etc/ceph" >>>>>> === mon.2 === >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 2 -t mon "pid file" >>>>>> "/var/run/ceph/mon.2.pid" >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 2 -t mon "log dir" "/var/log/ceph" >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 2 -t mon "log sym dir" "" >>>>>> --- ssh ceph2 "cd /etc/ceph ; ulimit -c unlimited ; mkdir -p /var/log/ceph" >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 2 -t mon "lock file" >>>>>> "/var/lock/subsys/ceph" >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 2 -t mon "pre stop command" "" >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 2 -t mon "post stop command" "" >>>>>> Stopping Ceph mon.2 on ceph2...--- ssh ceph2 "cd /etc/ceph ; ulimit >>>>>> -c unlimited ; while [ 1 ]; do >>>>>> [ -e /var/run/ceph/mon.2.pid ] || break >>>>>> pid=`cat /var/run/ceph/mon.2.pid` >>>>>> while [ -e /proc/$pid ] && grep -q cmon /proc/$pid/cmdline ; do >>>>>> cmd="kill $pid" >>>>>> echo -n $cmd... >>>>>> $cmd >>>>>> sleep 1 >>>>>> continue >>>>>> done >>>>>> break >>>>>> done" >>>>>> done >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 0 -t mds "auto start" "" >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 0 -t mds "user" "" >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 0 -t mds "ssh path" "/etc/ceph" >>>>>> === mds.0 === >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 0 -t mds "pid file" >>>>>> "/var/run/ceph/mds.0.pid" >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 0 -t mds "log dir" "/var/log/ceph" >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 0 -t mds "log sym dir" "" >>>>>> --- ssh ceph0 "cd /etc/ceph ; ulimit -c unlimited ; mkdir -p /var/log/ceph" >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 0 -t mds "lock file" >>>>>> "/var/lock/subsys/ceph" >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 0 -t mds "pre stop command" "" >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 0 -t mds "post stop command" "" >>>>>> Stopping Ceph mds0 on ceph0...--- ssh ceph0 "cd /etc/ceph ; ulimit -c >>>>>> unlimited ; while [ 1 ]; do >>>>>> [ -e /var/run/ceph/mds.0.pid ] || break >>>>>> pid=`cat /var/run/ceph/mds.0.pid` >>>>>> while [ -e /proc/$pid ] && grep -q cmds /proc/$pid/cmdline ; do >>>>>> cmd="kill $pid" >>>>>> echo -n $cmd... >>>>>> $cmd >>>>>> sleep 1 >>>>>> continue >>>>>> done >>>>>> break >>>>>> done" >>>>>> kill 1844...done >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 1 -t mds "auto start" "" >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 1 -t mds "user" "" >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 1 -t mds "ssh path" "/etc/ceph" >>>>>> === mds.1 === >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 1 -t mds "pid file" >>>>>> "/var/run/ceph/mds.1.pid" >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 1 -t mds "log dir" "/var/log/ceph" >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 1 -t mds "log sym dir" "" >>>>>> --- ssh ceph1 "cd /etc/ceph ; ulimit -c unlimited ; mkdir -p /var/log/ceph" >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 1 -t mds "lock file" >>>>>> "/var/lock/subsys/ceph" >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 1 -t mds "pre stop command" "" >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 1 -t mds "post stop command" "" >>>>>> Stopping Ceph mds1 on ceph1...--- ssh ceph1 "cd /etc/ceph ; ulimit -c >>>>>> unlimited ; while [ 1 ]; do >>>>>> [ -e /var/run/ceph/mds.1.pid ] || break >>>>>> pid=`cat /var/run/ceph/mds.1.pid` >>>>>> while [ -e /proc/$pid ] && grep -q cmds /proc/$pid/cmdline ; do >>>>>> cmd="kill $pid" >>>>>> echo -n $cmd... >>>>>> $cmd >>>>>> sleep 1 >>>>>> continue >>>>>> done >>>>>> break >>>>>> done" >>>>>> done >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 0 -t osd "auto start" "" >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 0 -t osd "user" "" >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 0 -t osd "ssh path" "/etc/ceph" >>>>>> === osd.0 === >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 0 -t osd "pid file" >>>>>> "/var/run/ceph/osd.0.pid" >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 0 -t osd "log dir" "/var/log/ceph" >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 0 -t osd "log sym dir" "" >>>>>> --- ssh ceph0 "cd /etc/ceph ; ulimit -c unlimited ; mkdir -p /var/log/ceph" >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 0 -t osd "osd data" "" >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 0 -t osd "btrfs path" "/data/osd0" >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 0 -t osd "btrfs devs" "" >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 0 -t osd "lock file" >>>>>> "/var/lock/subsys/ceph" >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 0 -t osd "pre stop command" "" >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 0 -t osd "post stop command" "" >>>>>> Stopping Ceph osd0 on ceph0...--- ssh ceph0 "cd /etc/ceph ; ulimit -c >>>>>> unlimited ; while [ 1 ]; do >>>>>> [ -e /var/run/ceph/osd.0.pid ] || break >>>>>> pid=`cat /var/run/ceph/osd.0.pid` >>>>>> while [ -e /proc/$pid ] && grep -q cosd /proc/$pid/cmdline ; do >>>>>> cmd="kill $pid" >>>>>> echo -n $cmd... >>>>>> $cmd >>>>>> sleep 1 >>>>>> continue >>>>>> done >>>>>> break >>>>>> done" >>>>>> kill 2033...done >>>>>> Unmounting Btrfs on ceph0:/data/osd0 >>>>>> --- ssh root@ceph0 "cd /etc/ceph ; ulimit -c unlimited ; umount >>>>>> /data/osd0 || true" >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 1 -t osd "auto start" "" >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 1 -t osd "user" "" >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 1 -t osd "ssh path" "/etc/ceph" >>>>>> === osd.1 === >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 1 -t osd "pid file" >>>>>> "/var/run/ceph/osd.1.pid" >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 1 -t osd "log dir" "/var/log/ceph" >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 1 -t osd "log sym dir" "" >>>>>> --- ssh ceph1 "cd /etc/ceph ; ulimit -c unlimited ; mkdir -p /var/log/ceph" >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 1 -t osd "osd data" "" >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 1 -t osd "btrfs path" "/data/osd1" >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 1 -t osd "btrfs devs" "" >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 1 -t osd "lock file" >>>>>> "/var/lock/subsys/ceph" >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 1 -t osd "pre stop command" "" >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 1 -t osd "post stop command" "" >>>>>> Stopping Ceph osd1 on ceph1...--- ssh ceph1 "cd /etc/ceph ; ulimit -c >>>>>> unlimited ; while [ 1 ]; do >>>>>> [ -e /var/run/ceph/osd.1.pid ] || break >>>>>> pid=`cat /var/run/ceph/osd.1.pid` >>>>>> while [ -e /proc/$pid ] && grep -q cosd /proc/$pid/cmdline ; do >>>>>> cmd="kill $pid" >>>>>> echo -n $cmd... >>>>>> $cmd >>>>>> sleep 1 >>>>>> continue >>>>>> done >>>>>> break >>>>>> done" >>>>>> done >>>>>> Unmounting Btrfs on ceph1:/data/osd1 >>>>>> --- ssh root@ceph1 "cd /etc/ceph ; ulimit -c unlimited ; umount >>>>>> /data/osd1 || true" >>>>>> umount: /data/osd1: device is busy. >>>>>> (In some cases useful info about processes that use >>>>>> the device is found by lsof(8) or fuser(1)) >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 2 -t osd "auto start" "" >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 2 -t osd "user" "" >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 2 -t osd "ssh path" "/etc/ceph" >>>>>> === osd.2 === >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 2 -t osd "pid file" >>>>>> "/var/run/ceph/osd.2.pid" >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 2 -t osd "log dir" "/var/log/ceph" >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 2 -t osd "log sym dir" "" >>>>>> --- ssh ceph2 "cd /etc/ceph ; ulimit -c unlimited ; mkdir -p /var/log/ceph" >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 2 -t osd "osd data" "" >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 2 -t osd "btrfs path" "/data/osd2" >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 2 -t osd "btrfs devs" "" >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 2 -t osd "lock file" >>>>>> "/var/lock/subsys/ceph" >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 2 -t osd "pre stop command" "" >>>>>> /usr/bin/cconf -c /etc/ceph/ceph.conf -i 2 -t osd "post stop command" "" >>>>>> Stopping Ceph osd2 on ceph2...--- ssh ceph2 "cd /etc/ceph ; ulimit -c >>>>>> unlimited ; while [ 1 ]; do >>>>>> [ -e /var/run/ceph/osd.2.pid ] || break >>>>>> pid=`cat /var/run/ceph/osd.2.pid` >>>>>> while [ -e /proc/$pid ] && grep -q cosd /proc/$pid/cmdline ; do >>>>>> cmd="kill $pid" >>>>>> echo -n $cmd... >>>>>> $cmd >>>>>> sleep 1 >>>>>> continue >>>>>> done >>>>>> break >>>>>> done" >>>>>> done >>>>>> Unmounting Btrfs on ceph2:/data/osd2 >>>>>> --- ssh root@ceph2 "cd /etc/ceph ; ulimit -c unlimited ; umount >>>>>> /data/osd2 || true" >>>>>> umount: /data/osd2: device is busy. >>>>>> (In some cases useful info about processes that use >>>>>> the device is found by lsof(8) or fuser(1)) >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> On Fri, Feb 18, 2011 at 12:35 PM, Colin McCabe <cmccabe@xxxxxxxxxxxxxx> wrote: >>>>>>> Hi Upendra, >>>>>>> >>>>>>> Are you running init-ceph from the source directory? If you do that, >>>>>>> it will use the ceph.conf in the source directory itself, which is >>>>>>> probably not what you want. So it might be good to double-check that. >>>>>>> >>>>>>> If all else fails, running init-ceph with -x will show you exactly >>>>>>> what the script is doing. If all goes well, its exit status should be >>>>>>> 0. Are you getting exit status 0? >>>>>>> >>>>>>> Colin >>>>>>> >>>>>>> >>>>>>> On Thu, Feb 17, 2011 at 1:55 AM, Upendra Moturi <upendra.m@xxxxxxxxxxxx> wrote: >>>>>>>> Hi Colin >>>>>>>> >>>>>>>> Here is my ceph.conf : >>>>>>>> >>>>>>>> [global] >>>>>>>> pid file = /var/run/ceph/$name.pid >>>>>>>> debug ms = 1 >>>>>>>> [mon] >>>>>>>> mon data = /data/mon$id >>>>>>>> [mon.0] >>>>>>>> host = ceph0 >>>>>>>> mon addr = 192.168.155.5:6789 >>>>>>>> [mon.1] >>>>>>>> host = ceph1 >>>>>>>> mon addr = 192.168.155.6:6789 >>>>>>>> [mon.2] >>>>>>>> host = ceph2 >>>>>>>> mon addr = 192.168.155.7:6789 >>>>>>>> [mds] >>>>>>>> >>>>>>>> [mds0] >>>>>>>> host = ceph0 >>>>>>>> [mds1] >>>>>>>> host = ceph1 >>>>>>>> >>>>>>>> [osd] >>>>>>>> sudo = true >>>>>>>> osd data = /data/osd$id >>>>>>>> osd journal = /data/osd$id/journal >>>>>>>> osd journal size = 512 >>>>>>>> osd use stale snap = true >>>>>>>> [osd0] >>>>>>>> host = ceph0 >>>>>>>> btrfs devs = /dev/sdb >>>>>>>> [osd1] >>>>>>>> host = ceph1 >>>>>>>> btrfs devs = /dev/sdb >>>>>>>> [osd2] >>>>>>>> host = ceph2 >>>>>>>> btrfs devs = /dev/sdb >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> On Thu, Feb 17, 2011 at 1:06 PM, Colin McCabe <cmccabe@xxxxxxxxxxxxxx> wrote: >>>>>>>>> I'm using head of line from the master branch. But that particular >>>>>>>>> code hasn't changed since January, which is 0.24.2 is from. >>>>>>>>> >>>>>>>>> In my ceph.conf, I just had an osd that was on a remote machine, and >>>>>>>>> everything else local. >>>>>>>>> >>>>>>>>> If you could post your ceph.conf here or in IRC, perhaps we might spot >>>>>>>>> an issue that's causing the problems that you see. >>>>>>>>> >>>>>>>>> Colin >>>>>>>>> >>>>>>>>> >>>>>>>>> On Wed, Feb 16, 2011 at 11:01 PM, Upendra Moturi <upendra.m@xxxxxxxxxxxx> wrote: >>>>>>>>>> Hi Colin >>>>>>>>>> I am using >>>>>>>>>> ceph version 0.24.2 commit:f7572de5cb87eb7157217be4975ae66d90831bb7 >>>>>>>>>> ubuntu 11.04 32 bit with upgraded kernal of 2.6.38-2-generic >>>>>>>>>> >>>>>>>>>> Installed ceph form apt source. >>>>>>>>>> >>>>>>>>>> With above configurations i still able yo reproduce. >>>>>>>>>> Can you please share me ur configurations? >>>>>>>>>> >>>>>>>>>> On Thu, Feb 17, 2011 at 3:31 AM, Colin McCabe <cmccabe@xxxxxxxxxxxxxx> wrote: >>>>>>>>>>> On Wed, Feb 16, 2011 at 1:41 PM, Colin McCabe <cmccabe@xxxxxxxxxxxxxx> wrote: >>>>>>>>>>>> On Wed, Feb 16, 2011 at 6:44 AM, Upendra Moturi <upendra.m@xxxxxxxxxxxx> wrote: >>>>>>>>>>>>> But if we want to start a particular osd or mon or mds ,its not >>>>>>>>>>>>> working and there is no error >>>>>>>>>>>>> eg:/etc/init.d/ceph start osd1 does not start osd1 and don't get any error >>>>>>>>>>>> >>>>>>>>>>>> That is expected, unless you are running init-ceph on the same node as >>>>>>>>>>>> osd1 is on. >>>>>>>>>>>> >>>>>>>>>>>> It might be nice to have some kind of interface like "run command X on >>>>>>>>>>>> osd1", but init-ceph is not that. >>>>>>>>>>>> >>>>>>>>>>>>> /etc/init.d/ceph -a stop also does not stop ceph on all nodes.It stops >>>>>>>>>>>>> on current node only >>>>>>>>>>>>> where as >>>>>>>>>>>>> /etc/init.d/ceph -a killall works fine. >>>>>>>>>>>> >>>>>>>>>>>> That sounds like a bug. I'll see if I can fix it. >>>>>>>>>>> >>>>>>>>>>> I'm afraid I can't reproduce this. >>>>>>>>>>> >>>>>>>>>>> I ran /etc/init.d/ceph -a stop >>>>>>>>>>> >>>>>>>>>>> and it stopped ceph daemons running on remote nodes too. Looking at >>>>>>>>>>> the code, it looks correct. >>>>>>>>>>> >>>>>>>>>>> Colin >>>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> -- >>>>>>>>>> Thanks and Regards, >>>>>>>>>> Upendra.M >>>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>>> Thanks and Regards, >>>>>>>> Upendra.M >>>>>>>> >>>>>>> >>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> Thanks and Regards, >>>>>> Upendra.M >>>>>> >>>>> >>>> >>>> >>>> >>>> -- >>>> Thanks and Regards, >>>> Upendra.M >>>> >>> >> >> >> >> -- >> Thanks and Regards, >> Upendra.M >> > -- Thanks and Regards, Upendra.M -- To unsubscribe from this list: send the line "unsubscribe ceph-devel" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
