2010/3/29 Rohan Gilchrist <rohan@xxxxxxxxxxxx>
So you're saying that your default gateway is an IP address that's part of a *different* network/subnet?
I don't know how this network has been designed, but typically I would expect that your default gateway would be something like
188.72.255.1
rather than 217.20.117.1 that you've mentioned earlier.
Take a look at mine for example:
[~]ifconfig
eth0 Link encap:Ethernet HWaddr FE:FD:6D:4A:C1:69
inet addr:109.xx.xxx.105 Bcast:109.74.193.255 Mask:255.255.255.0
inet6 addr: fe80::fcfd:6dff:fe4a:c169/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1RX packets:78742 errors:0 dropped:0 overruns:0 frame:0
TX packets:67114 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:35442733 (33.8 MiB) TX bytes:12607832 (12.0 MiB)
RX packets:8292 errors:0 dropped:0 overruns:0 frame:0
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
TX packets:8292 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1195297 (1.1 MiB) TX bytes:1195297 (1.1 MiB)
[~]netstat -rn
Kernel IP routing table109.xx.xxx.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
Destination Gateway Genmask Flags MSS Window irtt Iface
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth00.0.0.0 109.xx.xxx.1 0.0.0.0 UG 0 0 0 eth0
So you can see my host has .105 assigned to eth0, and the default gateway is .1 of the same network/subnet.
You might want to check that your addressing is correct.
> 2010/3/29 cahit Eyig?nl? <cahit.eyigunlu@xxxxxxxxx>:
On Mon, 29 Mar 2010, cahit Eyig?nl? wrote:
> there is no problem with my internet connection i just want that to do this cent os automatically :route add default gw 217.20.117.1
> before typing this my netstat -rn looks like this :
> root@lin3 [~]# netstat -rn (that is not able to connect to internet)
> Kernel IP routing table
> Destination Gateway Genmask Flags MSS Window irtt Iface
> 217.20.117.1 0.0.0.0 255.255.255.255 UH 0 0 0 eth0
> 188.72.255.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
> 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0
> after adding gateway : (this works perfect)
> root@lin3 [~]# netstat -rn
> Kernel IP routing table
> Destination Gateway Genmask Flags MSS Window irtt Iface
> 217.20.117.1 0.0.0.0 255.255.255.255 UH 0 0 0 eth0
> 188.72.255.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
> 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0
> 0.0.0.0 217.20.117.1 0.0.0.0 UG 0 0 0 eth0
>
> i just want to add bold line automatically
>
> and this is my ifconfig :
> root@lin3 [~]# ifconfig -a
> eth0 Link encap:Ethernet HWaddr 00:0C:29:83:21:44
> inet addr:188.72.255.189 Bcast:188.72.255.255 Mask:255.255.255.0
> inet6 addr: fe80::20c:29ff:fe83:2144/64 Scope:Link
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:9653 errors:0 dropped:0 overruns:0 frame:0
> TX packets:458 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:876648 (856.1 KiB) TX bytes:50814 (49.6 KiB)
> Base address:0x2000 Memory:d8920000-d8940000
>
> lo Link encap:Local Loopback
> inet addr:127.0.0.1 Mask:255.0.0.0
> inet6 addr: ::1/128 Scope:Host
> UP LOOPBACK RUNNING MTU:16436 Metric:1
> RX packets:483 errors:0 dropped:0 overruns:0 frame:0
> TX packets:483 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:75305 (73.5 KiB) TX bytes:75305 (73.5 KiB)
>
> sit0 Link encap:IPv6-in-IPv4
> NOARP MTU:1480 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
>
>
>
> 2010/3/29 Matt Iavarone <matt.iavarone@xxxxxxxxx>
> > This is my two line on route-eth0
> > address0=217.20.117.1
> > subnet0=255.255.255.255
> > but what should be next line for default gateway the only thing that i could
> > not complete is default gateway setting
> > and my netstat table must looklike this :
> > Destination Gateway Genmask Flags MSS Window irtt
> > Iface
> > 217.20.117.1 0.0.0.0 255.255.255.255 UH 0 0 0
> > eth0
> > xx.xx.xx.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
> > 0.0.0.0 217.20.117.1 0.0.0.0 UG 0 0 0
> > eth0
> > and now i see only the first two line truely i am adding 3rd line on every
> > time restart manually with route add default gw
> >
> > 2010/3/29 Les Mikesell <lesmikesell@xxxxxxxxx>
> >>
> >> cahit Eyig?nl? wrote:
> >> > i am reaching the network with this :
> >> > route add -net 217.20.117.1 netmask 255.255.255.255 dev eth0
> >> > route add default gw 217.20.117.1
> >> >
> >> > i have added eth0
> >> > address0=217.20.117.1
> >> > subnet0=255.255.255.255
> >> >
> >> > the first command is ok but how could i set the second command to cent
> >> > os to do it automatically
> >> >
> >>
> >> If you create a file named /etc/sysconfig/network-scripts/route-eth0 you
> >> can put
> >> lines in it that will have 'ip route' added at the beginning and executed
> >> after
> >> the interface is up. "ip route" takes some different arguments than the
> >> "route"
> >> command - see "man ip" for details.
> >>
> >> --
> >> Les Mikesell
> >> lesmikesell@xxxxxxxxx
> >>
> >>
> >>
> >> _______________________________________________
> >> CentOS mailing list
> >> CentOS@xxxxxxxxxx
> >> http://lists.centos.org/mailman/listinfo/centos
> >
> >
> > _______________________________________________
> > CentOS mailing list
> > CentOS@xxxxxxxxxx
> > http://lists.centos.org/mailman/listinfo/centos
> >
> >
>
> Why don't you post the results of 'ifconfig -a' and 'ip route show'?
> Giving information piecemeal is not helping anyone.
> _______________________________________________
> CentOS mailing list
> CentOS@xxxxxxxxxx
> http://lists.centos.org/mailman/listinfo/centos
>
>
>
>
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
_______________________________________________ CentOS mailing list CentOS@xxxxxxxxxx http://lists.centos.org/mailman/listinfo/centos
