Re: Forgetting network settings

[cahit Eyigünlü <cahit.eyigunlu@xxxxxxxxx>]

This is my two line on route-eth0

 address0=217.20.117.1
 subnet0=255.255.255.255

but what should be next line for default gateway the only thing that i could not complete is default gateway setting

and my netstat table must looklike this :

Destination     Gateway         Genmask         Flags   MSS Window  irtt Iface

217.20.117.1    0.0.0.0         255.255.255.255 UH        0 0          0 eth0

xx.xx.xx.0     0.0.0.0         255.255.255.0   U         0 0          0 eth0

0.0.0.0         217.20.117.1    0.0.0.0         UG        0 0          0 eth0

and now i see only the first two line truely i am adding 3rd line on every time restart manually with route add default gw 

2010/3/29 Les Mikesell <lesmikesell@xxxxxxxxx>

cahit Eyigünlü wrote:
> i am reaching the network with this :
> route add -net 217.20.117.1 netmask 255.255.255.255 dev eth0
> route add default gw 217.20.117.1
>
> i have added eth0
> address0=217.20.117.1
> subnet0=255.255.255.255
>
> the first command is ok but how could i set the second command to cent
> os to do it automatically
>

If you create a file named /etc/sysconfig/network-scripts/route-eth0 you can put
lines in it that will have 'ip route' added at the beginning and executed after
the interface is up.  "ip route" takes some different arguments than the "route"
command - see "man ip" for details.

--
  Les Mikesell
  lesmikesell@xxxxxxxxx

_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos

_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos