Re: LDAP Server Access Problem

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



On Sun, 2010-02-21 at 22:48 -0700, Paul R. Ganci wrote:
> Hi All,
> 
> I am at my wits end. I have a LDAP server setup on a machine (the names
> are changed to protect the innocent) example.mydomain.com running CentOS
> 5.4 and LDAP version 2.3.43-3. If I issue a ldapsearch command while
> logged onto the LDAP server host I get a valid response back. For
> example:
> 
> > ldapsearch -x -LLL -H ldaps://example.mydomain.com:636 "(uid=joker)" \
> > sn uid
> dn: uid=joker,ou=People,dc=mydomain,dc=com
> uid: joker
> sn: Nicholson
> 
> Everything works as expected. However if I try the same command from a
> remote machine remote.mydomain.com the command just hangs. I can not
> find a log entry anywhere that indicates something is wrong. I have
> checked the obvious things I can check. For example I know that port 636
> is open: 
> 
> > /etc/rc.d/init.d/iptables status | grep 636
> 110  ACCEPT     tcp  --  0.0.0.0/0            208.139.195.124     state
> NEW,ESTABLISHED tcp dpt:636 
> 111  ACCEPT     udp  --  0.0.0.0/0            208.139.195.124     state
> NEW,ESTABLISHED udp dpt:636
> 
> I have enabled access via /etc/hosts.allow:
> > cat /etc/hosts.allow | grep slapd
> slapd: ALL
> 
> I can see the server running and listening on port 636:
> > netstat -l | grep ldaps
> tcp        0      0 *:ldaps       *:*       LISTEN      
> tcp        0      0 *:ldaps       *:*       LISTEN
> 
> > ps auxww | grep slapd
> ldap     21865  0.0  0.2 467976  5860 ?        Ssl  19:54
> 0:02 /usr/sbin/slapd -h ldap:/// ldaps:/// -u ldap
> 
> I am missing something very obvious. Can anyone offer any clues? Thanks.
----
ldap ssl is deprecated but should actually still work. 

Do you actually have to specify the port number? I don't think so...

-H ldaps://example.mydomain.com
   should be sufficient

The preferred method is TLS (via standard -h ldap://example.mydomain.com
uri notation)

Note that ldap 'client' applications like ldapsearch
use /etc/openldap/ldap.conf so I would suspect that the 'certificates'
used by the 2 machines are different.

add -d 256 (or even higher debug level) to the ldapsearch command for
debugging - I'm not going to hazard any actual guesses.

Craig


-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos

[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux