---------------------------- Original Message ---------------------------- Subject: Re: Install CentOS-5.0 on HP-ComPaq DC7700 Dual Core From: "James B. Byrne" <byrnejb@xxxxxxxxxxxxx> Date: Mon, October 6, 2008 12:26 To: cenos@xxxxxxxxxx Cc: "John Newbigin" <jnewbigin@xxxxxxxxxxxxxxx> -------------------------------------------------------------------------- On Sun, October 5, 2008 20:39, John Newbigin wrote: > Also make sure you have the latest firmware and set the hard disk mode > in the BIOS to Raid (Which will enable AHCI). > > John. By the time I received this message I had already installed the ia_64 version of CentOS-5.2 with the BIOS set to IDE emulation. If now I change the BIOS to use RAID then the system cannot see the SATA drive at all. Is it possible to change the BIOS setting to RAID and subsequently load the necessary drivers from the boot DVD without having to reinstall the entire system? If so, then what is the procedure? Regards, -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@xxxxxxxxxxxxx Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3 -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@xxxxxxxxxxxxx Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3 _______________________________________________ CentOS mailing list CentOS@xxxxxxxxxx http://lists.centos.org/mailman/listinfo/centos