Mag Gam wrote:
Thankyou Anne. I just installed this and its seems to work. I am behind a RAID controller so hopefully anyone with cciss drivers can shed some light. I am able to see my logical devices but I have 6 drives per logical device. I would like to see all 12 drive status if possible.
The RAID controller watches the SMART status of the drives for you. You should watch the status of the RAID controller. It should give a warning if a drive is about to fail or has failed. I use array-info to get the status: http://sourceforge.net/projects/array-info/ # /usr/local/bin/array-info -d /dev/cciss/c0d0 Compaq Smart Array 5312 Firmware revision : 2.58 Rom revision : 2.58 1 logical drive configured. Logical drive 0 : Fault tolerance : RAID 5 Size : 957.10 GiB (2007181360 blocks of 512 bytes) Status : Logical drive is ok Mogens -- Mogens Kjaer, Carlsberg A/S, Computer Department Gamle Carlsberg Vej 10, DK-2500 Valby, Denmark Phone: +45 33 27 53 25, Fax: +45 33 27 47 08 Email: mk@xxxxxx Homepage: http://www.crc.dk _______________________________________________ CentOS mailing list CentOS@xxxxxxxxxx http://lists.centos.org/mailman/listinfo/centos
