OK, I downloaded the driver from Realtek homepage and build the modules
and it works now. Thanks for the patience to everybody.
Janez Košmrlj wrote:
I don't have fedora installed on the machine any more. But if i
understand correctly, if compiling the driver doesn't work, i can copy
the module from a fedora machine and replace the current one?
ABBAS KHAN wrote:
Thats what I wanted to know and thats exactly what I saw people
complaining about this card's incompatibility with kernel.
If you have time to work on the issue, if you want to find out the
bottom causes and if compiling the new driver doesn't help; you can
boot to Fedora and get the Kernel version and the driver's module
number and then switch back to CentOS, try to load the same module
(i hope it would be also in CentOS under /lib/modules/) through
modprobe and then the same kernel environment, if possible - since
you already told that Fedora's drivers work fine for you!
I hope this helps!
On Tue, Aug 19, 2008 at 7:49 AM, Janez Košmrlj <janezkosmr@xxxxxxxxx
<mailto:janezkosmr@xxxxxxxxx>> wrote:
Here is the lspci output from the machine:
root@buhtl:~# lspci
00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory
Controller Hub (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ
Integrated Graphics Controller (rev 02)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High
Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI
Express Port 1 (rev 01)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI
Express Port 3 (rev 01)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI
Express Port 4 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
UHCI Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
UHCI Controller #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
UHCI Controller #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family)
USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC
Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE
Controller (rev 01)
00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7
Family) SATA IDE Controller (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus
Controller (rev 01)
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL8101E PCI Express Fast Ethernet controller (rev ff)
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
the RTL-8139 is the secondary card pluged in the pci slot ad this
one works ok.
And yes this is the module.
And to Michael. I know of the disabling on-board LAN workaround,
but i need two LAN cards.
ABBAS KHAN wrote:
Is this the kernel module used for the LAN card driver?
/*r8169
*/
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx <mailto:CentOS@xxxxxxxxxx>
http://lists.centos.org/mailman/listinfo/centos
------------------------------------------------------------------------
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
