Is this the kernel module used for the LAN card driver?
r8169
r8169
On Tue, Aug 19, 2008 at 7:11 AM, Janez Košmrlj <janezkosmr@xxxxxxxxx> wrote:
I tried kernel-2.6.18-92.1.10.el5.x86_64.
I know of the driver on the Intel page, but I would like a system that works out of the box. So I can update it any time, since this system will be a router and it will be connected to the internet 24/7.
<http://mirror.centos.org/centos/5.2/updates/x86_64/RPMS/kernel-2.6.18-92.1.10.el5.x86_64.rpm>
ABBAS KHAN wrote:
Here is the driver, provided for Intel for the board.http://downloadcenter.intel.com/Detail_Desc.aspx?ProductID=2916&DwnldID=16242&lang=eng <http://downloadcenter.intel.com/Detail_Desc.aspx?ProductID=2916&DwnldID=16242&lang=eng>
You can compile it and give it a try as a last resort, if everything else fails.
Could you please tell the version of kernal you're using?
A simple search showed that this LAN card has a lot of issues with kernal.
Thanks.
On Tue, Aug 19, 2008 at 6:38 AM, Janez Košmrlj <janezkosmr@xxxxxxxxx <mailto:janezkosmr@xxxxxxxxx>> wrote:<mailto:janezkosmr@xxxxxxxxx <mailto:janezkosmr@xxxxxxxxx>>>
I know that disabling the LAN in BIOS works. The problem is that I
need the on-board card, since I am trying to build a home router
and I need 2 LAN cards for that. And the board has only one PCI slot.
ABBAS KHAN wrote:
I've Intel DG31PR with almost same Realtek chipset. Disabling
/ enabling on board LAN from the BIOS works flawlessly.
You can make sure if the board is certified at
hardware.redhat.com <http://hardware.redhat.com>
<http://hardware.redhat.com>.
I guess to test kernal you can use CentOS Live CD and the
dmesg tool as well.
Good luck!
On Tue, Aug 19, 2008 at 6:22 AM, Janez Košmrlj
<janezkosmr@xxxxxxxxx <mailto:janezkosmr@xxxxxxxxx><mailto:CentOS@xxxxxxxxxx <mailto:CentOS@xxxxxxxxxx>>
wrote:
Hi,
I am trying to install centos on the intel D945GCLF board.
It's a
mini-ITX board with the atom processor and it uses the Realtek
RTL8102EL LAN chipset. When I disable the on-board LAN card it
installs and runs OK, but when I enable it, I get kernel
panic at
boot.
The board runs perfectlj with Fedora 9 (with the latest
kernel) or
with Ubuntu server.
My question is: is there some way to run centos on this board
(test kernel, i can try for example)?
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx <mailto:CentOS@xxxxxxxxxx>
http://lists.centos.org/mailman/listinfo/centos
------------------------------------------------------------------------
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx <mailto:CentOS@xxxxxxxxxx>
http://lists.centos.org/mailman/listinfo/centos
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx <mailto:CentOS@xxxxxxxxxx>
http://lists.centos.org/mailman/listinfo/centos
------------------------------------------------------------------------
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
_______________________________________________ CentOS mailing list CentOS@xxxxxxxxxx http://lists.centos.org/mailman/listinfo/centos
