Re: Help setting up external drive via Firewire

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]




On Wed, Aug 13, 2008 at 4:50 PM, Laurence Alexander Hurst <L.A.Hurst@xxxxxxxxxxx> wrote:
2 things jump out:
       1. As has already been pointed out that is not a Centos Plus kernel. Did you reboot after installing the new kernel? (You have to reboot for a kernel update in order to be running the new kernel).

Thanks Akemi & Lawrence for pointing out the obvious that I was blind to! :D
I overlooked the exclude line for the Centos Update repo so yum took the wrong kernel update instead. Now downloading  2.6.18-92.1.10.el5.centos.plus and hopes everything will work after this.

 

       2. 1 hour to copy 100GB sounds like a very good speed. Obviously the eSATA interface will be the fastest as it will the the same as having it plugged directly into the SATA controller. For reference I recently copied 73GB from an internal SATA drive to an internal (software) raid0 array (made up of 2 SATA disks), and that took 1.5hours.

The first day's transfer just completed and it took about 1hr 10 minutes for 101GB, from du -h, which I think is in terms of 1024. So that's like 24.6MB/s which admittedly appears to be around the maximum real world data transfer rate for USB 2.0. According to some reviews of this WD model, the Firewire was supposedly up to 1/3 faster (they had figures of 35MBps vs 44Mbps).

So I am hoping to see a similar speed from the Firewire here to save some 20 minutes of waiting time, a whole week's backup would be almost 2.5 hours of savings!

Going to reboot the system now with the new kernel and hopes I don't lose the NIC or something :D



_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos

[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux