I want to write a script to automatically modify the partition table
I am starting with 3 partitions like this
# parted /dev/sda print
Model: VMware, VMware Virtual S (scsi)
Disk /dev/sda: 10.7GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 32.3kB 107MB 107MB primary ext3 boot
2 107MB 4828MB 4721MB primary ext3
3 4828MB 9023MB 4195MB primary lvm
And I want to remove partitions 2 & 3 and recreate 2 from the end of 1
to the end of the disk i.e. all the free space.
Removing 2 and 3 is easy.
# parted /dev/sda rm 3
# parted /dev/sda rm 2
# parted /dev/sda print
Model: VMware, VMware Virtual S (scsi)
Disk /dev/sda: 10.7GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 32.3kB 107MB 107MB primary ext3 boot
Is there a way to use a non-interactive command to create the new 2nd
partition in the free space?
Thanks
Dean
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
