On Thu, 2008-06-12 at 11:52 -0400, Joshua Baker-LePain wrote:
> On Wed, 11 Jun 2008 at 9:03pm, Timothy Selivanow wrote
>
> > I'm trying to install 5.1 using the onboard LSI Symbios 53C1010, and I'm
> > running into some trouble. When the computer first boots, the SCSI BIOS
> > sees the three HDDs, but when I go to install, the installer hangs for a
> > while at inserting the sym53c8xx driver and if I go over to the screen
> > on F4 it shows that it is trying to scan the SCSI bus and is resetting
> > all of the IDs. Once that is done, it moves on the the actual
> > installer, but does not see any drives.
>
> Have you tried all the usual SCSI voodoo -- check the cables, check your
> termination, ensure you used the proper color goat?
Ah! It was the wrong color of goat!
Actually, when I got into work this morning, I tried a number of other
steps like use a card, put the drives/drive cage in another system. It
came down to updating the BIOS.
When it comes to SCSI (not SAS), I tend to get scared easier than I
should. Old tech scares me (It's SCSI 160, not really that old...but
still)...it either has auto-magical stuff that I don't know/understand,
or it requires manual incantations, most of which I don't know.
--Tim
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
