part of my kickstart file is now:
clearpart --all --initlabel
part --ondisk=sda raid.01 --asprimary --bytes-per-inode=4096
--fstype="raid" --onpart=sda1 --size=20000
part --ondisk=sda swap --asprimary --bytes-per-inode=4096
--fstype="swap" --onpart=sda2 --size=4000
part --ondisk=sda raid.02 --asprimary --bytes-per-inode=4096
--fstype="raid" --onpart=sda3 --size=1 --grow
part --ondisk=sdb raid.03 --asprimary --bytes-per-inode=4096
--fstype="raid" --onpart=sdb1 --size=20000
part --ondisk=sdb swap --asprimary --bytes-per-inode=4096
--fstype="swap" --onpart=sdb2 --size=4000
part --ondisk=sdb raid.04 --asprimary --bytes-per-inode=4096
--fstype="raid" --onpart=sdb3 --size=1 --grow
raid / --bytes-per-inode=4096 --device=md0 --fstype="ext3" --level=1
raid.01 raid.03
raid /home --bytes-per-inode=4096 --device=md1 --fstype="ext3" --level=1
raid.02 raid.04
I changed the config to use --ondisk above and at install I get a
message saying:
"Unable to locate partition sda1 to use for ."
Press OK to reboot your system.
The above is the correct message. I did not leave any words out.
It looks good to me. What might I have wrong?
sda works just fine when not installing RAID.
Jerry
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
