Scott R. Ehrlich wrote:
What would be the recommended way to create a software RAID 10 array?
Again, two disks for the OS as s/w RAID 1, the remaining four disks
for data as RAID 10, with possibly 1 of the 4 as a [hot] spare.
well, if you only have 4 drives for that raid10, I dunno how have a hot
spare. if you reserve one as a hotspare, then you only have 3 left,
raid10's require an even number of drives. Forgetting the hotspare,
## partition sdc-sdf with one full disk primary partition each,
parttition type FD (linux auto raid)
mdadm --create /dev/md/myraid10 --level=raid10 --raid-devices=4
/dev/sdc1 /dev/sdd1 /dev/sde1 /dev/sdf1
mkfs /dev/md/myraid10
mount /dev/md/myraid10 /u01
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
