Re: Networking issue (after latest 5.1 update?)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



On Feb 2, 2008 12:12 PM, Barry Brimer <lists@xxxxxxxxxx> wrote:
> What do you see in dmesg?  Does the last bcm43xx message show that you are
> associated or not?

Well, clearly I'm associated as I can ping the router and also ping
addresses on the far side of the router.  However, dmesg output from
bringing up the interface is appended below.

Something else nasty is going on because for the last three reboots
the machine has only remained up for about 5 minutes at a time before
it becomes unable to execute any new programs and has to be
power-cycled to restart it.  I got one console message about a failed
journal write before the second of those forced reboots.  Sometimes I
can ctrl-alt-F2 over to a virtual console but then mingetty can't fork
so I can't log in; init then shuts down the tty because it's
respawning too fast, and I end up pressing the power button.  I'm
going to have to give up for now.


 ------------
SoftMAC: empty ratesinfo?
SoftMAC: empty ratesinfo?
ieee80211_crypt: registered algorithm 'WEP'
bcm43xx: set security called, .active_key = 0, .level = 1, .enabled =
1, .encrypt = 1
SoftMAC: Associate: Scanning for networks first.
SoftMAC: Associate: failed to initiate scan. Is device up?
bcm43xx: PHY connected
bcm43xx: PHY disconnected
bcm43xx: PHY connected
bcm43xx: Microcode rev 0x118, pl 0x17 (2004-05-06  21:34:00)
bcm43xx: Radio turned on
bcm43xx: Radio enabled by hardware
bcm43xx: Chip initialized
bcm43xx: 30-bit DMA initialized
bcm43xx: TODO: Incomplete code in keymac_write() at
drivers/net/wireless/bcm43xx/bcm43xx_main.c:1112
bcm43xx: TODO: Incomplete code in keymac_write() at
drivers/net/wireless/bcm43xx/bcm43xx_main.c:1112
bcm43xx: TODO: Incomplete code in keymac_write() at
drivers/net/wireless/bcm43xx/bcm43xx_main.c:1112
bcm43xx: TODO: Incomplete code in keymac_write() at
drivers/net/wireless/bcm43xx/bcm43xx_main.c:1112
bcm43xx: TODO: Incomplete code in keymac_write() at
drivers/net/wireless/bcm43xx/bcm43xx_main.c:1112
bcm43xx: TODO: Incomplete code in keymac_write() at
drivers/net/wireless/bcm43xx/bcm43xx_main.c:1112
bcm43xx: TODO: Incomplete code in keymac_write() at
drivers/net/wireless/bcm43xx/bcm43xx_main.c:1112
bcm43xx: TODO: Incomplete code in keymac_write() at
drivers/net/wireless/bcm43xx/bcm43xx_main.c:1112
bcm43xx: TODO: Incomplete code in keymac_write() at
drivers/net/wireless/bcm43xx/bcm43xx_main.c:1114
bcm43xx: TODO: Incomplete code in keymac_write() at
drivers/net/wireless/bcm43xx/bcm43xx_main.c:1114
bcm43xx: TODO: Incomplete code in keymac_write() at
drivers/net/wireless/bcm43xx/bcm43xx_main.c:1114
bcm43xx: TODO: Incomplete code in keymac_write() at
drivers/net/wireless/bcm43xx/bcm43xx_main.c:1114
bcm43xx: Keys cleared
bcm43xx: Selected 802.11 core (phytype 2)
ADDRCONF(NETDEV_UP): eth1: link is not ready
SoftMAC: Associate: Scanning for networks first.
SoftMAC: Scanning finished: scanned 11 channels starting with channel 1
SoftMAC: Queueing Authentication Request to 00:13:46:f1:3b:7c
SoftMAC: Cannot associate without being authenticated, requested authentication
SoftMAC: Already requested authentication, waiting...
SoftMAC: Sent Authentication Request to 00:13:46:f1:3b:7c.
SoftMAC: Open Authentication completed with 00:13:46:f1:3b:7c
SoftMAC: sent association request!
SoftMAC: associated!
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
audit(1201986381.450:4): avc:  denied  { read } for  pid=2072
comm="dhclient" name="services" dev=sda5 ino=9418832
scontext=system_u:system_r:dhcpc_t:s0
tcontext=root:object_r:rpm_script_tmp_t:s0 tclass=file
audit(1201986381.450:5): avc:  denied  { getattr } for  pid=2072
comm="dhclient" path="/etc/services" dev=sda5 ino=9418832
scontext=system_u:system_r:dhcpc_t:s0
tcontext=root:object_r:rpm_script_tmp_t:s0 tclass=file
bcm43xx: Radio turned off
bcm43xx: DMA-32 0x0260 (RX) max used slots: 1/64
bcm43xx: DMA-32 0x0200 (RX) max used slots: 1/64
bcm43xx: DMA-32 0x02A0 (TX) max used slots: 0/512
bcm43xx: DMA-32 0x0280 (TX) max used slots: 0/512
bcm43xx: DMA-32 0x0260 (TX) max used slots: 0/512
bcm43xx: DMA-32 0x0240 (TX) max used slots: 0/512
bcm43xx: DMA-32 0x0220 (TX) max used slots: 2/512
bcm43xx: DMA-32 0x0200 (TX) max used slots: 0/512
bcm43xx: PHY disconnected
bcm43xx: PHY connected
bcm43xx: Microcode rev 0x118, pl 0x17 (2004-05-06  21:34:00)
bcm43xx: Radio turned on
bcm43xx: Radio enabled by hardware
bcm43xx: Chip initialized
bcm43xx: 30-bit DMA initialized
bcm43xx: TODO: Incomplete code in keymac_write() at
drivers/net/wireless/bcm43xx/bcm43xx_main.c:1112
bcm43xx: TODO: Incomplete code in keymac_write() at
drivers/net/wireless/bcm43xx/bcm43xx_main.c:1112
bcm43xx: TODO: Incomplete code in keymac_write() at
drivers/net/wireless/bcm43xx/bcm43xx_main.c:1112
bcm43xx: TODO: Incomplete code in keymac_write() at
drivers/net/wireless/bcm43xx/bcm43xx_main.c:1112
bcm43xx: TODO: Incomplete code in keymac_write() at
drivers/net/wireless/bcm43xx/bcm43xx_main.c:1112
bcm43xx: TODO: Incomplete code in keymac_write() at
drivers/net/wireless/bcm43xx/bcm43xx_main.c:1112
bcm43xx: TODO: Incomplete code in keymac_write() at
drivers/net/wireless/bcm43xx/bcm43xx_main.c:1112
bcm43xx: TODO: Incomplete code in keymac_write() at
drivers/net/wireless/bcm43xx/bcm43xx_main.c:1112
bcm43xx: TODO: Incomplete code in keymac_write() at
drivers/net/wireless/bcm43xx/bcm43xx_main.c:1114
bcm43xx: TODO: Incomplete code in keymac_write() at
drivers/net/wireless/bcm43xx/bcm43xx_main.c:1114
bcm43xx: TODO: Incomplete code in keymac_write() at
drivers/net/wireless/bcm43xx/bcm43xx_main.c:1114
bcm43xx: TODO: Incomplete code in keymac_write() at
drivers/net/wireless/bcm43xx/bcm43xx_main.c:1114
bcm43xx: Keys cleared
bcm43xx: Selected 802.11 core (phytype 2)
SoftMAC: Associate: Scanning for networks first.
SoftMAC: Scanning finished: scanned 11 channels starting with channel 1
SoftMAC: Queueing Authentication Request to 00:13:46:f1:3b:7c
SoftMAC: Cannot associate without being authenticated, requested authentication
SoftMAC: Sent Authentication Request to 00:13:46:f1:3b:7c.
SoftMAC: Open Authentication completed with 00:13:46:f1:3b:7c
SoftMAC: sent association request!
SoftMAC: associated!
SoftMAC: Authentication response received from 00:17:ab:dd:07:ea but
no queue item exists.
SoftMAC: Authentication response received from 00:13:46:f1:3b:7c but
no queue item exists.
SoftMAC: Authentication response received from 00:17:ab:dd:07:ea but
no queue item exists.
SoftMAC: Authentication response received from 00:13:46:f1:3b:7c but
no queue item exists.
SoftMAC: Authentication response received from 00:17:ab:dd:07:ea but
no queue item exists.
SoftMAC: Authentication response received from 00:13:46:f1:3b:7c but
no queue item exists.
eth1: no IPv6 routers present
SoftMAC: Authentication response received from 00:17:ab:dd:07:ea but
no queue item exists.
SoftMAC: Authentication response received from 00:13:46:f1:3b:7c but
no queue item exists.
SoftMAC: Authentication response received from 00:17:ab:dd:07:ea but
no queue item exists.
SoftMAC: Authentication response received from 00:13:46:f1:3b:7c but
no queue item exists.
SoftMAC: Authentication response received from 00:17:ab:dd:07:ea but
no queue item exists.
SoftMAC: Authentication response received from 00:13:46:f1:3b:7c but
no queue item exists.
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos

[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux