Just bought an HP Deskjet F2120 and tried to install it on my CentOS 5.0 64-bit system. The printer installed fine, but sane does not recognize the device, so I tried to install hplip 2.7.10, which is supposed to support it.
Installation failed twice - first time because I did not have net-snmp-devel installed. I installed that, then tried again.
Now it fails because it claims I do not have libusb installed:
INSTALL MISSING REQUIRED DEPENDENCIES
------------------------------
-------
warning: There are 2 missing REQUIRED dependencies.
note: Installation of dependencies requires an active internet connection.
warning: Missing REQUIRED dependency: libusb (libusb - USB library)
error: This installer cannot install this dependency for your distro/OS and/or version.
error: Installation cannot continue without this dependency. Please manually install this dependency and re-run this installer.
However, both yum and rpm say this is installed:
$ yum list | grep libusb
libusb.i386 0.1.12-5.1 installed
libusb.x86_64 0.1.12-5.1 installed
libusb-devel.i386 0.1.12-5.1 base
libusb-devel.x86_64 0.1.12-5.1 base
$ rpm -qa | grep libusb
libusb-0.1.12-5.1.i386
libusb-0.1.12-5.1.x86_64
I tried installing via the tarball, but it failed, claiming I don't have libjpeg installed (it is, both 32 and 64 bit versions). Note that the hp-check output (below) shows both of these to be installed....
Any/all assistance/guideance would be appreciated - I'd hate to have to pack this up and take it back, but I will if need be.
mhr
$ hp-check
HP Linux Imaging and Printing System (ver. 1.6.7)
Dependency/Version Check Utility ver. 2.1
Copyright (c) 2003-6 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Basic system info...
--> Linux mhrichter 2.6.18-8.1.15.el5.nx #1 SMP Wed Oct 24 16:35:26 PDT 2007 x86_64 x86_64 x86_64 GNU/Linux
Currently installed version...
--> 1.6.7
Checking Python version...
--> Version 2.4.3 installed.
--> OK
Checking for user interface dependencies...
Checking for SIP...
--> OK
Checking for PyQt...
--> OK
Checking Qt version...
--> Version 3.3.6 installed.
--> OK
Checking SIP version...
--> Version 4.4.5 installed
--> OK
Checking PyQt version...
--> Version 3.16.0 installed.
--> OK
Checking for library dependencies...
Checking for libnetsnmp...
--> OK
Checking for libjpeg...
--> OK
Checking for libusb...
--> OK
Checking for libcrypto...
--> OK
Checking for libpthread...
--> OK
Checking for application dependencies...
Checking ghostscript...
--> Version 8.15.2
Checking gcc...
--> gcc (GCC) 4.1.1 20070105 (Red Hat 4.1.1-52 )
--> OK
Checking make...
--> GNU Make 3.81
--> OK
Checking ReportLab (optional)...
warning: Not installed. Fax coverpage support will be disabled.
Checking kernel module...
Checking for ppdev (optional)...
--> OK
Checking for CUPS...
--> scheduler is running
--> OK
Checking existing CUPS queues...
Printer Device URI HPLIP Installed?
------- -------------------------------------------------- --------------------
HP2120 hp:/usb/Deskjet_F2100_series?serial=CN7863R35K04TK Yes
MPP1100 parallel:/dev/lp0 No
Note: Any CUPS queues that are not 'HPLIP Installed', must be installed
with the 'hp:' or 'hpfax:' backends to have them work in HPLIP . Refer
to the install instructions on http://hplip.sourceforge.net for more help.
warning: There are 2 missing REQUIRED dependencies.
note: Installation of dependencies requires an active internet connection.
warning: Missing REQUIRED dependency: libusb (libusb - USB library)
error: This installer cannot install this dependency for your distro/OS and/or version.
error: Installation cannot continue without this dependency. Please manually install this dependency and re-run this installer.
However, both yum and rpm say this is installed:
$ yum list | grep libusb
libusb.i386 0.1.12-5.1 installed
libusb.x86_64 0.1.12-5.1 installed
libusb-devel.i386 0.1.12-5.1 base
libusb-devel.x86_64 0.1.12-5.1 base
$ rpm -qa | grep libusb
libusb-0.1.12-5.1.i386
libusb-0.1.12-5.1.x86_64
I tried installing via the tarball, but it failed, claiming I don't have libjpeg installed (it is, both 32 and 64 bit versions). Note that the hp-check output (below) shows both of these to be installed....
Any/all assistance/guideance would be appreciated - I'd hate to have to pack this up and take it back, but I will if need be.
mhr
$ hp-check
HP Linux Imaging and Printing System (ver. 1.6.7)
Dependency/Version Check Utility ver. 2.1
Copyright (c) 2003-6 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Basic system info...
--> Linux mhrichter 2.6.18-8.1.15.el5.nx #1 SMP Wed Oct 24 16:35:26 PDT 2007 x86_64 x86_64 x86_64 GNU/Linux
Currently installed version...
--> 1.6.7
Checking Python version...
--> Version 2.4.3 installed.
--> OK
Checking for user interface dependencies...
Checking for SIP...
--> OK
Checking for PyQt...
--> OK
Checking Qt version...
--> Version 3.3.6 installed.
--> OK
Checking SIP version...
--> Version 4.4.5 installed
--> OK
Checking PyQt version...
--> Version 3.16.0 installed.
--> OK
Checking for library dependencies...
Checking for libnetsnmp...
--> OK
Checking for libjpeg...
--> OK
Checking for libusb...
--> OK
Checking for libcrypto...
--> OK
Checking for libpthread...
--> OK
Checking for application dependencies...
Checking ghostscript...
--> Version 8.15.2
Checking gcc...
--> gcc (GCC) 4.1.1 20070105 (Red Hat 4.1.1-52 )
--> OK
Checking make...
--> GNU Make 3.81
--> OK
Checking ReportLab (optional)...
warning: Not installed. Fax coverpage support will be disabled.
Checking kernel module...
Checking for ppdev (optional)...
--> OK
Checking for CUPS...
--> scheduler is running
--> OK
Checking existing CUPS queues...
Printer Device URI HPLIP Installed?
------- -------------------------------------------------- --------------------
HP2120 hp:/usb/Deskjet_F2100_series?serial=CN7863R35K04TK Yes
MPP1100 parallel:/dev/lp0 No
Note: Any CUPS queues that are not 'HPLIP Installed', must be installed
with the 'hp:' or 'hpfax:' backends to have them work in HPLIP . Refer
to the install instructions on http://hplip.sourceforge.net for more help.
_______________________________________________ CentOS mailing list CentOS@xxxxxxxxxx http://lists.centos.org/mailman/listinfo/centos
