> -----Original Message-----
> From: centos-bounces@xxxxxxxxxx
> [mailto:centos-bounces@xxxxxxxxxx] On Behalf Of Ross S. W. Walker
> Sent: Sunday, March 04, 2007 11:00 AM
> To: CentOS mailing list
> Subject: RE: CentOS 4.4 lvm and drbd 0.8?
>
> > -----Original Message-----
> > From: centos-bounces@xxxxxxxxxx
> > [mailto:centos-bounces@xxxxxxxxxx] On Behalf Of Ross S. W. Walker
> > Sent: Sunday, March 04, 2007 10:44 AM
> > To: CentOS mailing list
> > Subject: RE: CentOS 4.4 lvm and drbd 0.8?
> >
> > > -----Original Message-----
> > > From: centos-bounces@xxxxxxxxxx
> > > [mailto:centos-bounces@xxxxxxxxxx] On Behalf Of Johnny Hughes
> > > Sent: Sunday, March 04, 2007 7:16 AM
> > > To: CentOS ML
> > > Subject: Re: CentOS 4.4 lvm and drbd 0.8?
> > >
> > > On Fri, 2007-03-02 at 15:35 -0600, Les Mikesell wrote:
> > > > Johnny Hughes wrote:
> > > > > On Tue, 2007-02-27 at 00:20 -0600, Les Mikesell wrote:
> > > > >> Johnny Hughes wrote:
> > > > >>> I am not quite sure that drbd-8 is totally ready yet
> > > for prime time.
> > > > >>> Not that I don't trust them (I use drbd in production
> > > and I love it),
> > > > >>> but I want to wait for an 8.0.1 or 8.0.2 level before
> > I move the
> > > > >>> enterprise CentOS RPMS to that version.
> > > > >>>
> > > > >>> I would be open to producing some 8.0.0 rpms for
> > > testing ... though that
> > > > >>> will probably need to wait until after CentOS 5 Beta is
> > > released.
> > > > >> Could you get the same effect by running software RAID1
> > > with one of the
> > > > >> drives connected via iscsi?
> > > > >
> > > > > Provides the same effect as DRBD? ... not really ... as
> > > DRBD provides a
> > > > > second machine in hot standby mode with a totally synced
> > > partition that
> > > > > is ready to take over on a failure of the first machine.
> > > If the first
> > > > > computer blows up (power supply, hard drive crash, etc.),
> > > the second one
> > > > > starts up and takes over with no down time (except the
> > > time it takes to
> > > > > mount the partition and start the services on the new
> machine).
> > > >
> > > > How is the mirror/sync different than RAID1, and how is
> > > DRBD's version
> > > > different than you would have if you exported the 2nd machine's
> > > > partitions via iscsi and mirrored the live machine using md
> > > devices with
> > > > one local, one iscsi member for each? If that is actually
> > > possible, I'd
> > > > expect those general purpose components too be much better
> > > tested and
> > > > more reliable than little-used code like DRBD. Does DRBD
> > > have special
> > > > handling for updating slightly out-of-sync copies or does
> > > it have to
> > > > rebuild the whole thing if not taken down cleanly also?
> > >
> > > I have no idea how it works, other than it uses the md device
> > > and raid 1
> > > kernel code to mirror the drive/partition to a second machine
> > > ... and do
> > > so in real time. It uses heartbeat to create a cluster and
> > does real
> > > time failover.
> > >
> > > It does not require rebuilding the whole device if shutdown
> > > uncleanly ... it syncs from the last updated point.
> > >
> > > My point was that the 0.8 (actually renamed 8.0.0) code was just
> > > released. The 0.6 and 0.7 code has been out and stable for quite
> > > sometime and I have been using it for more than 2 years.
> >
> > If you were running a later kernel version of MD, it is conceivable
> > that you could create a mirror with a remote storage drive over
> > iscsi.
> >
> > It would be up to you though to figure out how to fail-over to it
> > and to limit the bandwidth MD takes to that remote mirror and
> > releasize that it will always be fully synchronous and so
> > performance may not be the best over a WAN.
> >
> > You can also use a pair of vise grip plyers to do the job of an
> > adjustable wrench, but it will probably strip the bolt in the
> > process.
>
> If you do plan on using MD over iscsi why not try something
> interesting like a RAID level other than 1, say a RAID 3,4,5,6
> and get some increased performance over drbd and regular iscsi.
>
> You need a later kernel that supports MD bitmaps to prevent
> complete re-sync on disconnect and the storage would have to
> all be local, but say you have a bunch of servers all with
When I said local I meant on the local area network.
> direct attached storage and you wish to consolidate storage,
> but want to leverage all your existing direct-connect. You
> can have each server export it's storage via iSCSI have
> a central server that mounts all this storage and creates
> a fault tolerant MD RAID out of it, creates a LVM VG on
> top then re-exports it via iSCSI to different platforms.
>
> -Ross
______________________________________________________________________
This e-mail, and any attachments thereto, is intended only for use by
the addressee(s) named herein and may contain legally privileged
and/or confidential information. If you are not the intended recipient
of this e-mail, you are hereby notified that any dissemination,
distribution or copying of this e-mail, and any attachments thereto,
is strictly prohibited. If you have received this e-mail in error,
please immediately notify the sender and permanently delete the
original and any copy or printout thereof.
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
