At Fri, 16 Feb 2007 it looks like John Summerfield composed: > Pierre Bourgin wrote: > > Al Sparks a écrit : > > > > Al Sparks : > > > > > I have a kickstart file that basically runs the following: > > > > > > > > > > install nfs --server=nfserver.blah.local > > > > > --dir=/vol/updts/staging/CentOS_4.3 #include %some_file.cfg > > > > > > > > > > I want to be able to access or "include" a file on the nfs share not > > > > > the local CDROM I've got this on. How do I do that? > > > > <snip #include syntax typo> > > > > > Also, my network configuration includes a local DNS, so I've been able to > > > reach the NFS server by name. > > > > ? strange: I've already test it (mainly under centos3) and an IP address was > > required for the NFS server; but I was booting via network (PXE), not from > > cdrom. > > > > > But it occurs to me that I need to place > > > that information on the ks.cfg file on the cdrom portion, not the > > > "some_file.cfg" located on the nfs share. > > > > your configuration is unusual: you use the cdrom to boot, right ? > > then you use an NFS server for the media location instead of the cdrom, > > right ? > > So why in this case use the cdrom as storage for your include ks file ? it > > will be really easier to use an NFS resource to store this additional file. > > > > Anyway, in this configuration, I guess the cdrom won't be mounted > > automatically, you have to do it in the main .ks file like this: > > > > ----------------- > > install nfs --server=1.2.3.4 --dir=/vol/updts/staging/CentOS_4.3 > > %include /media/cdrom/anotherfile.ks > > > > # the "pre"/"post" directives must be at the end of the .ks file > > %pre > > mount /media/cdrom > > ------------------ > > > > I'm not shure this will work: does the install system has an entry in its > > /etc/fstab for "/media/cdrom" ? > > > > It it's not the case, you will have to mount the cdrom "by hand", that means > > its device is subject to change depending on the hardware configuration of > > your machine: is it "hda", "hdb", "hdc" ... ? > > You should try within the shell of console #2. > > The "pre" section should then look like: > > > > ----- > > %pre > > mount /dev/hda2 /media/cdrom > > ----- > > > > > > install nfs --server=1.2.3.4 --dir=/vol/updts/staging/CentOS_4.3 > > > > %include /path/to/file > > > > > > > > Once the installation system is running, the mount point for the used > > > > NFS share by directive "install" is /mnt/source . > > > > > > The really great info you gave me is the mount point the nfs command uses. > > > > in fact, /mnt/source is the mount point of the source media (NFS, cdrom, > > whatever). > > Once booted, goto onto console #2 with Ctl-Alt-F2 and use "mount" to see it. > > One of the images (in Nahant) is to boot off the CD and install from the > network. > Yes, I use that single image and did raw "dd" to a USB pendrive and use that to get me the installation screen and enough to type: linux text askmethod On these 1-u servers though, I have to toggle "USB-ZIP" for it does not see the USB-Pendrive as a USB-CDROM... Sometimes even that does not work and I have to resort back to a USB-CDROM and drag that over. Then I take off and do NFS test installs (5-min) prior to the more lengthy kickstart with all the post-install packages. An admin at my work flipped the console redirective to /dev/ttyS0 and I can't see much anymore during kickstarts from the monitor I have hooked up. I thought there would be a way to redirect (tee) the output to both physical monitor and /dev/ttyS0 but have not opted to start playing with the kickstart system seeing we use it too much daily to afford me time to experiment. -- Bill Schoolcraft <*> http://wiliweld.com ~ "Unix is very simple, but it takes a genius to understand the simplicity." (Dennis Ritchie)
_______________________________________________ CentOS mailing list CentOS@xxxxxxxxxx http://lists.centos.org/mailman/listinfo/centos
