On Fri, 2007-01-19 at 08:45 -0500, Rob Lines wrote:
>
>
> On 1/18/07, Paul <subsolar@xxxxxxxxxxxx> wrote:
> On Thu, 2007-01-18 at 11:50 -0500, Jay Lee wrote:
> > Mike Fedyk wrote:
> > > Rob Lines wrote:
> > >> I am trying to connect our centos 4.4 machines to our
> Novell Netware
> > >> 5 servers.
> > >>
> > >> The goal is to allow the centos 4.4 clients to connect to
> the server
> > >> and access shared folders. We are not looking for a
> single sign-on
> > >> style solution just the ability to connect.
> > >
> > > Check into using ncpfs with centos. If not, then see if
> netware can
> > > serve to nfs or smb/cifs clients.
> > ncpfs is only in the centosplus kernel I believe. I also
> found it buggy
> > and horribly slow.
>
> Yes, you need to be using the CentOS Plus kernel and build the
> NCPFS
> rpms from fedora so you can mount the volumes.
>
> It also does not hurt to have IPX enabled on Netware &
> Linux ... we have
> IPX enabled yet because we still use DOS and the old moldy 2.x
> client
> still seems to work best for our use.
>
> I can see if dig out the information on what I did for the one
> C4
> station I setup
>
> I definatly would like to see that info if you can find it.
>
> The one question that I do have is what effect the move to the CentOS
> Plus kernel would have other than allowing us access to the ncpfs?
> The users are power users that mostly maintain their own machines and
> handle their own updates. What issues could come up by using the new
> kernel rather than the base one?
>
> Thank you,
> Rob
>
OK here is what I've done so far ...
== Configure the CentOS Plus repository on the workstation ==
Edit the /etc/yum.repo.d/CentOS-Base.repo file and make the following
changes:
Find the [update] section and add the following line:
exclude=kernel kernel-smp
Find the [centosplus] section and change
enabled=0
To
enabled=1
Then add the line
includepkg=kernel kernel-smp
Install the CentOS Plus kernel with the command “yum update kernel”,
once the new kernel is installed reboot the machine.
== Compile and Install the networking utilities ==
Download the ncpfs source RPM from the fedora core 6 repository
Install the ncpfs source rpm and edit the following lines in the spec
file
change the line
chmod 755 $RPM_BUILD_ROOT/usr/bin/ncpmount
$RPM_BUILD_ROOT/usr/bin/ncpumount
to
chmod 4755 $RPM_BUILD_ROOT/usr/bin/ncpmount
$RPM_BUILD_ROOT/usr/bin/ncpumount
Build the actual RPMs using the command “rpmbuild –ba SPECS/ncpfs.spec”
after which you will have ipxutils and ncpfs RPMs under the RPMS/i386
directory.
Install ipxutils & ncpfs RPMs built above
== Enable IPX Networking on the System ==
Edit /etc/sysconfig/network and add the following lines
IPX=yes
IPXAUTOPRIMARY=off
IPXAUTOFRAME=off
IPXINTERNALNODENUM=0
IPXINTERNALNETNUM=0
Edit /etc/sysconfig/networking/devices/ifcfg-eth0 and add the following
lines:
IPXACTIVE_802_2=’yes’
IPXPRIMARY_802_2=’yes’
IPXNETNUM_802_2=’0xb0320002’ (the netnum needs to be the correct one for
the facility)
Restart the networking subsystem with the “service network restart”
command, and then test IPX connectivity by issuing the “slist” command.
If the workstation has IPX connectivity you should receive a list of
local servers.
== Building and Installing GUI client for Novell Netware ==
Download the source file gtknw2-0.3.tar.bz2 for gtknw2 from
gtknw2.sourceforge.net and then untar the application with the command
“tar jxvf gtknw2-0.3.tar.bz2”.
To build the application you will need the gtk2-devel package and it’s
requirements besides the compiler and usual requirements.
To build the application, perform the following commands:
cd gtknw2-0.3
./configure
make
su –c make install
Keep an eye out for errors during the configure & make steps.
== Configuring the GUI client to auto launch at login ==
Login as the user you want the login front end to automatically launch
for and go into “Applictions|Preferences|More Preferences|Sessions”
configuration tool and click on the “Startup Programs” tab and
add /usr/local/bin/gtknw2 to the startup program list.
I still have not figured out how to have it automatically log out of
netware when the user does ... anybody with suggestions I'm all ears.
Paul
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
