Kirk Bocek wrote:
> chrism@xxxxxxxxx wrote:
> > I'm doing this from memory as the machine is at another location
> > now. I think I did this:
> >
> > turned off ncq (per Josh's suggestion)
> > turned on write caching (it's on an oversized ups and the data
> > isn't critical) set storsave to "performance"
> > changed the memory interleave (thanks to kirk's suggestion). It
> > was off by default. used parted to create gpt disklabel
> > set noatime and one other option that was suggested here for the
> > RAID partition used mke2fs -j -b 4096 /dev/blah
> >
> > That was it.
>
> Okay, now try installing kernel-module-xfs and xfsutils (located in
> the centosplus repository), run mkfs.xfs on some unused space, mount
> and re-run bonnie++.
I'm sure that would be faster, but I'm sticking to ext3 for now.
--
Bowie
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
