[CentOS] Re: Hard drive errors

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



Bowie Bailey spake the following on 9/21/2006 12:56 PM:
> One of my CentOS boxes has started giving me errors.  The box is
> CentOS-4.4 (i386) fully updated.  It has a pair of SATA drives in a
> software raid 1 configuration.
> 
> The errors I see are:
> 
>     ata1: command 0xca timeout, stat 0x50 host_stat 0x24
>     ata1: status=0x50 { DriveReady SeekComplete }
>     Info fld=0x1e22b8, Current sda: sense key No Sense
>     ata2: command 0xca timeout, stat 0x50 host_stat 0x24
>     ata2: status=0x50 { DriveReady SeekComplete }
>     Info fld=0x1e2598, Current sdb: sense key No Sense
> 
> If it was just coming from one drive, I would say it was a bad drive,
> but this is happening on both drives.
> 
> Can anyone give me a starting place to diagnose this?
> 
> Thanks.
> 
> --
> Bowie
Cables? Connections? Power supply going bad?


-- 

MailScanner is like deodorant...
You hope everybody uses it, and
you notice quickly if they don't!!!!

_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos

[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux