Hi,
Thanks a lot to the guy that tried to help me. But i really need to
use centos 4.3 since i have 3 linux already running and i didn't want
to reinstall and reconfigure them. The problem is that i need full
support to pptp-conntract and also ppp_mppe in the kernel. I had to
compile a kernel with that modules by myself. I even tried to use
those modules already compiled for the 2.6 kernel for SME server (that
are similar to those of centos 4)
that one can find at
http://distro.ibiblio.org/pub/linux/distributions/smeserver/releases/7/builds/rpms/RPMS/i586/
But the problem is that the modules install and are loaded but
cannot work together. No VPN coming into the intranet gets connected
when module ip_nat_pptp is loaded . Look at the error:
Jul 28 20:25:48 edm194 pppd[20710]: pptpd-logwtmp: $Version$
Jul 28 20:25:48 edm194 pppd[20710]: pppd 2.4.3 started by root, uid 0
Jul 28 20:25:48 edm194 pppd[20710]: Using interface ppp0
Jul 28 20:25:48 edm194 pppd[20710]: Connect: ppp0 <--> /dev/pts/1
Jul 28 20:25:48 edm194 pptpd[20709]: GRE: Bad checksum from pppd.
Jul 28 20:26:18 edm194 pppd[20710]: LCP: timeout sending Config-Requests
Jul 28 20:26:18 edm194 pppd[20710]: Connection terminated.
Jul 28 20:26:18 edm194 pppd[20710]: Using interface ppp0
Jul 28 20:26:18 edm194 pppd[20710]: Connect: ppp0 <--> /dev/pts/1
Jul 28 20:26:18 edm194 pppd[20710]: tcflush failed: Bad file descriptor
Jul 28 20:26:18 edm194 pppd[20710]: tcsetattr: Invalid argument (line 1016)
Jul 28 20:26:18 edm194 pppd[20710]: Exit.
Jul 28 20:26:18 edm194 pptpd[20709]: GRE:
read(fd=6,buffer=804eb00,len=8196) from PTY failed: status = -1 error
= Input/output error, usually caused by unexpected termination of
pppd, check option syntax and pppd logs
Jul 28 20:26:18 edm194 pptpd[20709]: CTRL: PTY read or GRE write
failed (pty,gre)=(6,7)
Jul 28 20:26:18 edm194 pptpd[20709]: CTRL: Client 201.14.175.204
control connection finished
As soon as I unload this module the connection establishes.
But I managed to get a 2.4.31 kernel running with all these modules, namely
ip_conntrack_pptp
ip_conntrack_proto_gre
ip_nat_pptp
ip_nat_proto_gre
and
ppp_mppe
loaded so that incoming VPN connections work, as well as outgoing vpn
connections through NAT at the gateway are correctly redirected to the
server outside the intranet. This kernel is in another linux that runs
and old version of red hat. I need to upgrade this system and centos
is my choice.
So, that is the reason i want a kernel 2.4 loaded in centos 4.3 or
4.2. Actually i've read somewhere that, with compatible modutils, i
can do that, but i don't know how to install and where to find
modutils ( old ones) that will let me boot my 2.4.31 kernel in centos
4, without disrupting the whole system.
I hope someone can help me out. If anyone knows where i can find
those modules for centos kernel 2.6 would also solve the problem. Any
other solution to my problem is very welcome too.
Thanks a lot.
Luís
----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
