> -----Original Message-----
> From: centos-bounces@xxxxxxxxxx
> [mailto:centos-bounces@xxxxxxxxxx] On Behalf Of Linus Hicks
> Sent: Tuesday, July 25, 2006 7:29 AM
> To: CentOS mailing list
> Subject: Re: [CentOS] Building a new 2.6 kernel
>
>
> John Warren wrote:
> > Success, well 98% success anyway.
> >
> > New kernel boots just fine if you leave it alone during the
> boot but I have
> > run into one small problem that I home someone may have seen before.
> >
> > During the boot Kudzu starts up. If you leave it alone and
> let it timeout the
> > boot completes. If you enter the Kudzu then the boot will
> hang. If you
> > CTRL-ALT-DEL the system will do a clean reboot. If you
> enter Kudzu it wants to
> > remove the Generic modem driver.
>
> Have you tried altering /etc/sysconfig/kudzu?
No, it currently reads:
# Set to anything other than 'no' to force a 'safe' probe on startup.
# 'safe' probe disables:
# - serial port probing
# - DDC monitor probing
# - PS/2 probing
SAFE=no
I guess I could set serial port probing to no.
>
> You might also inspect /etc/sysconfig/hwconf and see if you
> can determine what
> it believes is different.
See my other post but it seems to be "Generic Serial Modem" entries.
>
> And have you read the kudzu man page?
Yes, but I thought that was more for manually using Kudzu.
>
> Linus
> _______________________________________________
> CentOS mailing list
> CentOS@xxxxxxxxxx
> http://lists.centos.org/mailman/listinfo/centos
>
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
