Re: [CentOS] Restoring data from disk w/ messed up partition tables

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



Unfortunately, I do *not* remember the original partition settings.

I was hoping to find a live CD that could fix such disasters (i.e. systemrescueCD, or some such thing). I did find a Windows based program that's supposed to do the trick. The evaluation edition lets you see if it can see your lost data; you have to buy it ($79) to actually be able to recover the data. This was at: 

http://www.stellarinfo.com/linux-data-recovery.htm

I'm sure there must be an open source trick somewhere that should work though.

Paul


 -------------- Original message ----------------------
From: "William L. Maltby" <BillsCentOS@xxxxxxxxxxxx>

--- Begin Message ---
On Tue, 2006-06-13 at 20:20 +0000, techlists@xxxxxxxxxxx wrote:
> I had the electricity go out the other day. When my Centos 4.3 workstation came up, I said yes when it got to the prompt "Unclean shutdown, force filesystem check?" prompt.
> 
> It ground away for awhile and then said something about a bad superblock. Yikes! I thought, that's a bad sign.
> 
> After a reboot, I got nothing but a grub> prompt.
> 
> I tried booting into rescue mode using the install CD, and got a message "No valid partitions found". I tried to mount /dev/hda, and got a message "no /etc/fstab found".
> 
> I tried running the install CD, and went into Disk Druid to see if it could see any existing partitions on the drive, and got the message "Partition table corrupted, must re-initialize disk, and reformat". Not a good sign. I backed out at that point, not wanting to go beyond a point of no return.
> 
> I have about 4 years of archived e-mails, and some other misc stuff on that drive that I don't want to lose. 
> 
> Anyone have any suggestions what steps to take next?

The critical Q: do you *know* exactly what the partition settings were
before? If so, there is certainly hope. Manual partitioning can be done
using plain old fdisk or sfdisk. That gives some *possibilities*.

I won't bore you with details yet. I have recovered from this situation
with no special software (test and live) but I knew the layouts.

I'll be alert for your message.

Maybe there's some software that can help? Back in days of yore, I wrote
some "C" that looked at some 3B FDs and HDs and detected the start of
partition(s) (found super blocks, free inode lists, etc.). Maybe
something like that in the FS world?

> <snip sig stuff>

> Paul

HTH
-- 
Bill

Attachment: signature.asc
Description: This is a digitally signed message part


--- End Message ---
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos

[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux