[CentOS] Help debugging superodoctor

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



I've tried several times to get superOdoctor to run on this machine, and
have had no luck yet.  Aside from this error message, 

# superodoctor

*****************************************************************************
 Supero Doctor II - Linux version 2.24(060523)
 Copyright(c) 1993-2006 by Super Micro Computer, Inc.
http://supermicro.com/
*****************************************************************************

(superodoctor:7713): GnomeUI-WARNING **: While connecting to session
manager:
Authentication Rejected, reason : None of the authentication protocols
specified are supported and host-based authentication failed.

The application appears to open, then just crashes, never producing any
output or anything.  I've included a backtrace, just in case someone
could help me out.  The thing that worries me is the
lib64/tls/libpthread.so.0.  That same library gave me problems when I
was setting up the WRF weather model to run, and was forced to use
LD_ASSUME_KERNEL = 2.4 in order to get it to run.  I tried the same
trick with superodoctor, but did not work.

Any and all help appreciated...  I've sent requests for help to super
micro, but have not gotten any response from them.  This is an x86_64
machine, and the version of superodoctor is for the x86_64.  AFIK, the
installation was OK, with no problems.

Regards,

Sam



Backtrace was generated from '/usr/sbin/superodoctor'

Using host libthread_db library "/lib64/tls/libthread_db.so.1".
[Thread debugging using libthread_db enabled]
[New Thread 182894241344 (LWP 6993)]
0x0000003b4b00bfc4 in waitpid () from /lib64/tls/libpthread.so.0
#0  0x0000003b4b00bfc4 in waitpid () from /lib64/tls/libpthread.so.0
#1  0x000000375d458c04 in libgnomeui_module_info_get ()
from /usr/lib64/libgnomeui-2.so.0
#2  <signal handler called>
#3  0x0000003b4a5706c3 in strstr () from /lib64/tls/libc.so.6
#4  0x000000000042e8f8 in smbus_byte_data_read (bustype=0,
smb_base_io_addr=4352, 
    slave=47, offset=40, data=0x7fbffff45c) at smbus.c:636
#5  0x000000000042c00f in get_item_reading (sThis_System=0x63e010,
thisitem=0x63e480, 
    parameters=0x63f910, iParameter_Count=38, cRet=0x7fbffff4f0 "0§s")
at sd.c:2131
#6  0x000000000040b411 in create_SD_Table (sThis_System=0x63e010,
spItem=0x63e480, 
    iItem_Count=19, spParameter=0x63f910, iParameter_Count=38) at
main.c:1798
#7  0x000000000040c146 in main (argc=7007456, argv=0x6aece0) at
main.c:2471

Thread 1 (Thread 182894241344 (LWP 6993)):
#0  0x0000003b4b00bfc4 in waitpid () from /lib64/tls/libpthread.so.0
No symbol table info available.
#1  0x000000375d458c04 in libgnomeui_module_info_get ()
from /usr/lib64/libgnomeui-2.so.0
No symbol table info available.
#2  <signal handler called>
No symbol table info available.
#3  0x0000003b4a5706c3 in strstr () from /lib64/tls/libc.so.6
No symbol table info available.
#4  0x000000000042e8f8 in smbus_byte_data_read (bustype=0,
smb_base_io_addr=4352, 
    slave=47, offset=40, data=0x7fbffff45c) at smbus.c:636
	errNo = 0
	i = 0
	init_done = -1
	res = 0
	file = 0
	filename = '\0' <repeats 19 times>
	test_addr = 1685017119
#5  0x000000000042c00f in get_item_reading (sThis_System=0x63e010,
thisitem=0x63e480, 
    parameters=0x63f910, iParameter_Count=38, cRet=0x7fbffff4f0 "0§s")
at sd.c:2131
	iRet = 0
	dataH = 0
	dataL = 0
	data = 0
	errNoL = 10154652
	errNo = 0
	div = 1
	bitmask = 4406925
	_v = 0 '\0'
#6  0x000000000040b411 in create_SD_Table (sThis_System=0x63e010,
spItem=0x63e480, 
    iItem_Count=19, spParameter=0x63f910, iParameter_Count=38) at
main.c:1798
	thisitem = (ITEMS *) 0x63e480
	spSD_Table = (SD_TABLE *) 0x9af270
	i = 0
	div = 0
	errNo = 0
	Read = "0§s\000\000\000\000\0000§"
	High = "0§s\000\000\000\000\000®Q"
	Low = "0§s\000\000\000\000\000û%"
#7  0x000000000040c146 in main (argc=7007456, argv=0x6aece0) at
main.c:2471
	app1 = (GtkWidget *) 0x6aece0
	about2 = (GtkWidget *) 0x0
	windowAlertMessage = (GtkWidget *) 0x73a730
	arg = 6853872
	interval = 400
	bReset_Status = 0
	cpStatus = 0x0
	sThis_System = (SYSTEM_VARS *) 0x63e010
	spItem = (ITEMS *) 0x63e480
	spParameter = (PARAMETERS *) 0x63f910
	iItem_Count = 19
	cMB_Manufacturer = "Supermicro", '\0' <repeats 19 times>
	cMB_Product = "X6DA8", '\0' <repeats 24 times>
	cMB_Version = "PCB Version", '\0' <repeats 18 times>
	spSD_Table = (SD_TABLE *) 0x73a730



_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos

[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux