There's a howto for switching from Whitebox, I'd imagine that ES to CentOS
would be similar:
http://centos.org/modules/smartfaq/faq.php?faqid=19
I took the above FAQ and made a working script you're free to play with:
http://chico.benjamindsmith.com/wbel2centos4.sh
Good luck.
On Friday 06 January 2006 19:47, Sungsoo Kim wrote:
> Hi, all!
>
> I want to change current RHEL 4.0 ES into CentOS 4.2 on Sun X4100 server.
> The server has SAS SCSI based two 2.5" hard disks.
> I could only install RHEL 4.0 Update 1 because the server is equipped with
> RHEL 4.0 Update 1's device driver only.
>
> I've included below the boot process messages concerned with SCSI
controller.
> If it's possible for me to install CentOS 4.0 on my X4100, I am ready to
> switch to it.
>
> TIA
>
>
> Sungsoo Kim
>
>
> -------------------
>
> SCSI subsystem initialized
> Fusion MPT base driver 3.02.18
> Copyright (c) 1999-2005 LSI Logic Corporation
> ACPI: PCI interrupt 0000:02:03.0[A] -> GSI 28 (level, low) -> IRQ 209
> mptbase: Initiating ioc0 bringup
> ioc0: SAS1064: Capabilities={Initiator}
> Fusion MPT SCSI Host driver 3.02.18
> scsi0 : ioc0: LSISAS1064, FwRev=01040000h, Ports=1, MaxQ=203, IRQ=209
> Vendor: FUJITSU Model: MAV2073RCSUN72G Rev: 0301
> Type: Direct-Access ANSI SCSI revision: 04
> SCSI device sda: 143374738 512-byte hdwr sectors (73408 MB)
> SCSI device sda: drive cache: write through
> sda: sda1 sda2 sda3
> Attached scsi disk sda at scsi0, channel 0, id 2, lun 0
> Vendor: FUJITSU Model: MAV2073RCSUN72G Rev: 0301
> Type: Direct-Access ANSI SCSI revision: 04
> SCSI device sdb: 143374738 512-byte hdwr sectors (73408 MB)
> SCSI device sdb: drive cache: write through
> sdb: sdb1
> Attached scsi disk sdb at scsi0, channel 0, id 3, lun 0
>
--
"The best way to predict the future is to invent it."
- XEROX PARC slogan, circa 1978
