Re: Installing mdadm and C7 on new computer

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

On 04/19/2022 09:57 AM, Roberto Ragusa wrote:
> On 4/18/22 1:27 PM, H wrote:
>> I have a new computer with 2 x 2TB SSDs where I wanted to install C7 and use mdadm for RAID1 configuration and encrypting the /home partition. On the net I found which I adopted slightly with respect to partition sizes, using RAID1 for /boot and /root as well and added the /home partition with RAID1 and chose to have /home encrypted.
> It may be a good idea to also have / and swap encrypted, since user data can go there easily
> (logs, locatedb, swapped mem).
> I would do:
> - /boot as a separate RAID1 (md1=sda1+sdb1)
> - then another RAID1 (md2=sda2+sdb2) using all the remaining disk
> - luks on top of md2, giving you luks-xxxxx
> - LVM with a PV on luks-xxxxx
> - VG and LVs for swap, / and /home (do not assign all the available space now, especially if using xfs as filesystem)
> Not sure if you can do this setup through the installer, you have to try (in a VM maybe).
> Regards.
Thank you. I will have time to get back to this system tomorrow to try this.

CentOS mailing list

[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]

  Powered by Linux