On 4/29/21 9:17 AM, Joshua Kramer wrote:
@Johnny Hughes- what version of the nVidia drivers did you have problems
with, and what were the problems? I'm just curious. I have a Latitude
E7450 with an M840 chipset and I've never had problems compiling or getting
them to work under stock CentOS 8 kernels.
well I have a Dell Precision M6800/M6700 with NVIDIA Corporation
GK104GLM [Quadro K3100M] (rev a1) cards
(but will try again later, I probably forgot to disable nouveau)
On Fri, Apr 9, 2021 at 12:54 PM Johnny Hughes <johnny@xxxxxxxxxx> wrote:
On 4/9/21 11:43 AM, Phil Perry wrote:
On 09/04/2021 16:40, R C wrote:
On 4/9/21 9:24 AM, Johnny Hughes wrote:
On 4/7/21 6:44 PM, R C wrote:
Hello,
I am running Centos/RHEL 8 on a Dell precision M6800/6700 with a:
NVIDIA
Corporation GK104GLM [Quadro K3100M]
Is there a driver for that one? or am I stuck with nouveaux ?
The kernel included in CentOS-8 (the last time I tested it), did not
properly build and run the proprietary NVIDIA drivers .. neither did
the
same kernel in RHEL.
I found out, trying to install the driver, the NVIDIA installer was
complaining. (I was pointed to where the latest driver for it was, by
Nvidia (which surprised me a bit that they were still maintaining it
actually, at least it's the impression I have)
The GK104GLM [Quadro K3100M] _should_ be supported by the latest NVIDIA
driver (currently v460.67) on el8. I say _should_ as I'm not 100% sure.
I'm assuming your device is as below (check the device IDs with 'pci
-nn'):
[10de:11b6] NVIDIA Corporation GK104GLM [Quadro K3100M]
That device was previously listed as supported:
https://download.nvidia.com/XFree86/Linux-x86_64/410.66/README/supportedchips.html
but I can't find it listed on the currently supported chipset's page,
hence my doubt:
https://download.nvidia.com/XFree86/Linux-x86_64/460.67/README/supportedchips.html
I'd be interested to know which driver version NVIDIA pointed you
towards?
What I did was shift my workstation install to the elrepo kernel-ml
kernels (you might want kernel-lt .. it is latest long term kernel). I
can then build the latest NVIDIA drivers for my graphics card and use
them.
http://elrepo.org/tiki/kernel-ml
http://elrepo.org/tiki/kernel-lt
I have no issues using the elrepo kernels .. those guys and gals are
outstanding. All the stuff they do is great.
My card is a 1080ti .. so I have not tried building for Quadro 3100M ..
but if NVIDIA has a linux driver for that, then it should build using
the elrepo kernels.
Phil Perry can tell us if the NVIDIA drivers they carry actually now
work for EL8 .. i stopped trying it after I switched kernels as they
don't carry drivers on elrepo for the kernel-ml or kernel-lt and I just
rebuild the official NVIDIA drivers manually after every kernel update.
That was sort of my plan, to see and wait if things would work with
later kernels. Fr now my desktop seems to be working ok-ish. When my
desktop is up for over 10-12 hrs, there seem to be some flickering,
windows that 'switch' focus etc, and at times the gnome desktop flat
out crashes (the machine keeps running, but no gnome.
Assuming it is supported by the latest v460.67 driver, and the above
omission is a mistake, ELRepo have a driver (kmod-nvidia) which should
work with the el8 distro kernel.
As Johnny says above, if you use a different kernel, such as those from
elrepo, you will need to install the driver directly from NVIDIA.
Thanks Phil.
I MIGHT try shifting back to the main CentOS kernel and see if they have
fixed the issue I was having loading NVIDIA drivers. If I ever have any
spare time on my hands :)
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
https://lists.centos.org/mailman/listinfo/centos
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
https://lists.centos.org/mailman/listinfo/centos
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
https://lists.centos.org/mailman/listinfo/centos
